XC6118C12AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C12AMR-G is an active-low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as a push-pull, totem-pole output device with a 1.2V threshold voltage. The device is housed in a SOT-25-5 surface-mount package and is designed for applications requiring voltage monitoring and reset signal generation.

The XC6118C12AMR-G maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified based on matching electrical specifications, functional output characteristics, and regulatory compliance standards. Alternative components may be required due to inventory availability, supply chain considerations, or packaging format preferences.

Substiute Parts

XC6118C12AMR-G

Torex Semiconductor LtdIn Stock: 1314XC6118C12AMR-G Datasheet

Current PartRFQ

S-1009C12I-M5T1U

ABLIC Inc.In Stock: 29123S-1009C12I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C12AMR-G is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Single-channel voltage detection capability
• 1.2V threshold voltage specification
• Push-pull, totem-pole output configuration
• Active-low reset signal logic
• Operating temperature range of -40°C to 85°C

Mechanical & Regulatory Equivalence Criteria:

• Surface-mount technology
• SC-74A / SOT-753 package classification
• RoHS3 compliance
• Moisture sensitivity level 1 (unlimited)
• REACH unaffected status

The substitute part S-1009C12I-M5T1U, manufactured by ABLIC Inc., meets all electrical and regulatory requirements for direct functional substitution. Both components operate identically within the specified voltage monitoring and reset signal generation application space. The primary distinction between these parts is the supplier device package designation (SOT-25-5 versus SOT-23-5) and packaging format (tape & reel versus cut tape), which do not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6118C12AMR-G and S-1009C12I-M5T1U are Active product status components with full regulatory compliance across RoHS3, REACH, and moisture sensitivity classifications. Selection between these parts should be based on the following engineering considerations:

XC6118C12AMR-G (Torex Semiconductor Ltd):

• Supplied in tape & reel packaging format
• Current inventory: 1214 pieces
• Designated supplier device package: SOT-25-5

S-1009C12I-M5T1U (ABLIC Inc.):

• Supplied in cut tape packaging format
• Current inventory: 29066 pieces
• Designated supplier device package: SOT-23-5

Both components deliver identical electrical performance and functional output characteristics. The choice between these parts is determined by packaging format requirements, inventory availability, and supply chain logistics rather than electrical or functional considerations. Both parts are suitable for direct substitution in voltage detector and reset signal generation applications requiring 1.2V threshold monitoring with active-low output logic.

Frequently Asked Questions (FAQ)

Q: Can the S-1009C12I-M5T1U directly replace the XC6118C12AMR-G in an existing circuit design?

A: Yes. Both components are electrically equivalent voltage detectors with identical threshold voltage (1.2V), output configuration (push-pull, totem-pole), reset logic (active-low), and operating temperature range (-40°C to 85°C). The components are functionally interchangeable at the circuit level.

Q: What is the difference between SOT-25-5 and SOT-23-5 package designations?

A: Both designations refer to the same SC-74A / SOT-753 physical package classification used for surface-mount applications. The numerical suffix indicates the pin count (5 pins). These are functionally compatible package variants with identical pinout and electrical characteristics.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the XC6118C12AMR-G and S-1009C12I-M5T1U carry identical RoHS3 compliance, REACH unaffected status, and moisture sensitivity level 1 (unlimited) ratings. Regulatory and environmental compliance is equivalent across both components.

Q: What is the primary reason to consider substitution between these parts?

A: Substitution is typically driven by supply chain availability, packaging format preference (tape & reel versus cut tape), or inventory logistics. The XC6118C12AMR-G is supplied in tape & reel format with lower current inventory, while the S-1009C12I-M5T1U is available in cut tape format with significantly higher inventory levels.

Q: Do these parts have different reset timeout specifications?

A: No. Both components have reset timeout specifications listed as not applicable (indicated by "-" in the parameter set). Reset timeout is not a differentiating factor between these voltage detector devices.

Q: Are both parts suitable for industrial temperature range applications?

A: Yes. Both components operate across the -40°C to 85°C temperature range, which covers standard industrial operating conditions. This specification is identical for both the XC6118C12AMR-G and S-1009C12I-M5T1U.