XC6118C10BMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C10BMR-G is an active low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as a push-pull, totem pole output device in a surface mount SOT-25-5 package. The device monitors a 1V threshold voltage and is classified as Active product status. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility is required while maintaining electrical and mechanical compatibility within the specified parameter set.

Substiute Parts

XC6118C10BMR-G

Torex Semiconductor LtdIn Stock: 720XC6118C10BMR-G Datasheet

Current PartRFQ

XC6118C10AMR-G

Torex Semiconductor LtdIn Stock: 62123XC6118C10AMR-G Datasheet

Parametric EquivalentRFQ

S-1002CA10I-M5T1U

ABLIC Inc.In Stock: 1997S-1002CA10I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1004CA10I-M5T1U

ABLIC Inc.In Stock: 875S-1004CA10I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C10BMR-G is determined by strict equivalence across the following parameters: voltage detector type, single-channel monitoring configuration, 1V threshold voltage, push-pull totem pole output, active low reset functionality, -40°C to 85°C operating temperature range, surface mount technology, SC-74A/SOT-753 package classification, ROHS3 compliance, and MSL 1 rating.

The substitute parts XC6118C10AMR-G, S-1002CA10I-M5T1U, and S-1004CA10I-M5T1U meet all electrical parameter requirements. Packaging variations exist between Tape & Reel (TR) and Cut Tape (CT) formats, which affect supply chain logistics but do not alter electrical or mechanical compatibility. Supplier device package designations (SOT-25-5 versus SOT-23-5) reference equivalent physical footprints within the SC-74A/SOT-753 classification.

Parameter Comparison

Engineering Selection Recommendations

All four parts—XC6118C10BMR-G, XC6118C10AMR-G, S-1002CA10I-M5T1U, and S-1004CA10I-M5T1U—carry Active product status and maintain full compliance with ROHS3, REACH Unaffected, and EAR99 export control classifications. Selection between these parts is based on availability and packaging requirements rather than electrical performance differentiation.

XC6118C10AMR-G is the primary equivalent within the Torex Semiconductor Ltd product line, offering identical electrical specifications and Tape & Reel packaging. S-1002CA10I-M5T1U and S-1004CA10I-M5T1U are cross-manufacturer equivalents from ABLIC Inc., providing functional interchangeability with identical electrical parameters. The S-1004CA10I-M5T1U variant is supplied in Cut Tape format, suitable for lower-volume applications or manual assembly workflows.

Frequently Asked Questions (FAQ)

Q: Can XC6118C10AMR-G be used as a direct replacement for XC6118C10BMR-G?

A: Yes. Both parts are manufactured by Torex Semiconductor Ltd and share identical electrical specifications, operating temperature range, output configuration, and package classification. The difference is packaging format: XC6118C10BMR-G is supplied in Tape & Reel, while XC6118C10AMR-G is also supplied in Tape & Reel with higher inventory availability.

Q: Are the ABLIC S-1002CA10I-M5T1U and S-1004CA10I-M5T1U parts electrically equivalent to the Torex XC6118C10BMR-G?

A: Yes. Both ABLIC parts meet all electrical parameter requirements: 1V threshold voltage, single-channel monitoring, push-pull totem pole output, active low reset, -40°C to 85°C operating temperature, and SC-74A/SOT-753 package classification. They are cross-manufacturer equivalents suitable for direct substitution.

Q: What is the difference between SOT-25-5 and SOT-23-5 supplier device packages?

A: Both designations reference equivalent physical footprints within the SC-74A/SOT-753 package classification. The difference is nomenclature used by individual suppliers. Electrical and mechanical compatibility is maintained across all parts in this substitution group.

Q: Does packaging format (Tape & Reel versus Cut Tape) affect electrical performance?

A: No. Packaging format affects supply chain logistics and assembly workflow only. Tape & Reel (TR) is used for high-volume automated assembly; Cut Tape (CT) is used for lower-volume or manual assembly. Electrical specifications remain identical.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. XC6118C10BMR-G, XC6118C10AMR-G, S-1002CA10I-M5T1U, and S-1004CA10I-M5T1U are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. All parts share identical SC-74A/SOT-753 package classification and pin configuration. PCB footprints and schematic connections remain unchanged across all four parts.