XC6108C32AMR-G Equivalent & Substitute Parts

Part Overview

The XC6108C32AMR-G is a single-channel voltage supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device functions as a voltage detector with push-pull, totem pole output configuration and active low reset functionality. The part operates across the industrial temperature range of -40°C to 85°C and is housed in a SOT-25-5 surface mount package. The XC6108C32AMR-G maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical parameters and functional characteristics align with the original specification, enabling direct replacement in circuit applications where package compatibility permits.

Substiute Parts

XC6108C32AMR-G

Torex Semiconductor LtdIn Stock: 1052XC6108C32AMR-G Datasheet

Current PartRFQ

S-1002CA32I-M5T1U

ABLIC Inc.In Stock: 1023S-1002CA32I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C32I-M5T1U

ABLIC Inc.In Stock: 1027S-1009C32I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6108C32AMR-G are identified based on strict parametric equivalence across the following critical criteria:

Electrical Equivalence Parameters:

• Single voltage monitoring channel
• 3.2V threshold voltage
• Push-pull, totem pole output configuration
• Active low reset logic
• Identical operating temperature range (-40°C to 85°C)

Compliance & Environmental Parameters:

• ROHS3 compliance
• REACH unaffected status
• Moisture sensitivity level 1 (unlimited)
• Active product status

Functional Classification:

• Voltage detector type
• Power management (PMIC) category

The identified substitute parts S-1002CA32I-M5T1U and S-1009C32I-M5T1U from ABLIC Inc. satisfy all electrical and functional parameters listed above. Both substitutes are manufactured by ABLIC Inc., maintain identical voltage threshold, output configuration, reset logic, and operating temperature specifications. Both parts carry equivalent compliance certifications and active product status. The primary distinction between the main part and substitutes exists in the supplier device package designation (SOT-25-5 versus SOT-23-5), which represents a package footprint variation within the same SC-74A, SOT-753 case family.

Parameter Comparison

Engineering Selection Recommendations

Selection between the XC6108C32AMR-G and its substitute parts S-1002CA32I-M5T1U or S-1009C32I-M5T1U is determined by circuit board layout and package footprint requirements.

XC6108C32AMR-G (Torex Semiconductor Ltd):

• Primary selection when SOT-25-5 package footprint is specified in PCB design
• Active product status with established supply chain
• ROHS3 and REACH compliant for regulated applications

S-1002CA32I-M5T1U (ABLIC Inc.):

• Direct electrical substitute when SOT-23-5 package footprint is required
• Active product status with equivalent compliance certifications
• Interchangeable with S-1009C32I-M5T1U at the electrical level

S-1009C32I-M5T1U (ABLIC Inc.):

• Direct electrical substitute when SOT-23-5 package footprint is required
• Active product status with equivalent compliance certifications
• Interchangeable with S-1002CA32I-M5T1U at the electrical level

All three parts maintain identical electrical specifications, compliance status, and functional performance. Selection is contingent upon PCB layout compatibility with the respective package designations. Both ABLIC substitutes are suitable for applications where the SOT-23-5 footprint accommodates the design requirements.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA32I-M5T1U or S-1009C32I-M5T1U be used as direct replacements for XC6108C32AMR-G?

A: Electrical substitution is valid when the circuit board layout accommodates the SOT-23-5 package footprint. The three parts are electrically equivalent across all specified parameters: 3.2V threshold voltage, push-pull totem pole output, active low reset, and -40°C to 85°C operating range. Package footprint compatibility must be confirmed before implementation.

Q: What is the difference between SOT-25-5 and SOT-23-5 packages?

A: Both designations reference the SC-74A, SOT-753 case family but represent different pin configurations and footprint layouts. SOT-25-5 and SOT-23-5 are distinct package variants. PCB design files must specify which package variant is accommodated by the circuit board layout. Physical compatibility cannot be assumed without explicit footprint verification.

Q: Are the ABLIC parts (S-1002CA32I-M5T1U and S-1009C32I-M5T1U) interchangeable with each other?

A: Yes. Both ABLIC parts are electrically identical across all specified parameters and carry equivalent compliance certifications. Selection between them is determined by availability and supply chain considerations rather than functional or electrical differences.

Q: Do all three parts meet the same compliance requirements?

A: Yes. XC6108C32AMR-G, S-1002CA32I-M5T1U, and S-1009C32I-M5T1U are all ROHS3 compliant, REACH unaffected, and carry moisture sensitivity level 1 (unlimited). All three maintain active product status.

Q: What parameters determine substitution eligibility for this voltage detector?

A: Substitution is determined by: single voltage monitoring channel, 3.2V threshold voltage, push-pull totem pole output configuration, active low reset logic, -40°C to 85°C operating temperature range, surface mount technology, and equivalent compliance certifications. Package footprint compatibility is a secondary consideration that must be verified against PCB design specifications.