XC6108C28AMR-G Equivalent & Substitute Parts

Part Overview

The XC6108C28AMR-G is a single-channel voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device operates as a push-pull, totem pole output supervisor with active low reset functionality, designed for system monitoring applications requiring voltage threshold detection at 2.8V. The part is currently in active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Alternative equivalent parts are necessary to address supply chain flexibility, packaging preferences, and inventory availability across multiple manufacturers while maintaining identical electrical and mechanical specifications.

Substiute Parts

XC6108C28AMR-G

Torex Semiconductor LtdIn Stock: 1236XC6108C28AMR-G Datasheet

Current PartRFQ

XC6118C28AMR-G

Torex Semiconductor LtdIn Stock: 3358XC6118C28AMR-G Datasheet

DirectRFQ

S-1002CA28I-M5T1U

ABLIC Inc.In Stock: 1094S-1002CA28I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C28I-M5T1U

ABLIC Inc.In Stock: 4027S-1009C28I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6108C28AMR-G is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Single channel voltage detection capability
• 2.8V voltage threshold setting
• Push-pull, totem pole output configuration
• Active low reset functionality
• Operating temperature range of -40°C to 85°C (TA)

Mechanical & Compliance Equivalence Criteria:

• Surface mount technology
• SC-74A / SOT-753 package classification
• SOT-25-5 or SOT-23-5 supplier device package compatibility
• ROHS3 compliance
• MSL 1 (Unlimited) moisture sensitivity rating
• REACH Unaffected status
• Active product status

The substitute parts listed below meet all electrical and mechanical requirements, with variations limited to manufacturer identity, packaging format (tape & reel versus cut tape), and minor package designation differences (SOT-25-5 versus SOT-23-5) that remain functionally equivalent within the SC-74A / SOT-753 classification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical equivalence to the XC6108C28AMR-G based on provided specifications. Selection among these alternatives should be based on the following factors:

Manufacturer Continuity: The XC6118C28AMR-G maintains Torex Semiconductor Ltd as the manufacturer, providing supply chain consistency with the original part while offering increased inventory availability (3300 units in stock versus 1127 units for the XC6108C28AMR-G).

Alternative Manufacturer Options: The S-1002CA28I-M5T1U and S-1009C28I-M5T1U from ABLIC Inc. provide functionally equivalent alternatives with identical electrical specifications and compliance certifications. These parts differ only in packaging format and supplier device package designation (SOT-23-5 versus SOT-25-5), both of which fall within the SC-74A / SOT-753 classification.

Packaging Format Considerations: The XC6118C28AMR-G and S-1009C28I-M5T1U are supplied in tape & reel format, suitable for high-volume automated assembly. The S-1002CA28I-M5T1U is supplied in cut tape format, appropriate for lower-volume or mixed-component applications.

Compliance & Regulatory: All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring regulatory equivalence across all options.

Inventory Availability: The S-1009C28I-M5T1U offers the highest current inventory level (3951 units), followed by XC6118C28AMR-G (3300 units), providing supply security for high-volume requirements.

Frequently Asked Questions (FAQ)

Q: Can the XC6118C28AMR-G be used as a direct replacement for the XC6108C28AMR-G?

A: Yes. The XC6118C28AMR-G is electrically and mechanically equivalent to the XC6108C28AMR-G. Both are manufactured by Torex Semiconductor Ltd with identical voltage threshold (2.8V), output configuration (push-pull, totem pole), reset functionality (active low), operating temperature range (-40°C to 85°C), and package classification (SC-74A, SOT-753). The primary difference is packaging format (tape & reel versus unspecified) and increased inventory availability.

Q: What is the difference between SOT-25-5 and SOT-23-5 package designations?

A: Both SOT-25-5 and SOT-23-5 are supplier device package designations that fall within the SC-74A / SOT-753 package classification. These designations reflect minor variations in package geometry and lead configuration from different manufacturers. For the purposes of this application, both are mechanically and electrically compatible within the specified SC-74A / SOT-753 classification.

Q: Are the ABLIC Inc. parts (S-1002CA28I-M5T1U and S-1009C28I-M5T1U) fully equivalent to the Torex parts?

A: Yes. The ABLIC Inc. parts meet all electrical and mechanical equivalence criteria, including 2.8V voltage threshold, push-pull totem pole output, active low reset, -40°C to 85°C operating temperature, SC-74A / SOT-753 package classification, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity. The only differences are manufacturer identity and packaging format.

Q: Which substitute part should be selected for high-volume production?

A: For high-volume automated assembly, either the XC6118C28AMR-G or S-1009C28I-M5T1U is recommended, as both are supplied in tape & reel format. The S-1009C28I-M5T1U offers the highest current inventory (3951 units), while the XC6118C28AMR-G maintains manufacturer continuity with Torex Semiconductor Ltd.

Q: Are all substitute parts compliant with current regulatory requirements?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory equivalence. All parts carry MSL 1 (Unlimited) moisture sensitivity rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Can the cut tape format (S-1002CA28I-M5T1U) be used in automated assembly equipment?

A: Cut tape format is typically used for lower-volume or mixed-component applications and manual assembly processes. For automated high-speed assembly lines, tape & reel format (XC6118C28AMR-G or S-1009C28I-M5T1U) is the standard requirement. Verify equipment compatibility before selecting cut tape format for production environments.