XC6108C25DGR-G Equivalent & Substitute Parts

Part Overview

The XC6108C25DGR-G is an active low voltage supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel voltage detector operates as a push-pull, totem pole output supervisor with a 2.5V threshold voltage. The device is designed for power management applications requiring voltage monitoring and reset signal generation in embedded systems and industrial electronics.

The XC6108C25DGR-G maintains active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified based on identical electrical performance parameters, package compatibility, and regulatory compliance standards. Alternative models are necessary to accommodate different packaging formats, inventory availability, or supply chain requirements while maintaining equivalent circuit functionality.

Substiute Parts

XC6108C25DGR-G

Torex Semiconductor LtdIn Stock: 857XC6108C25DGR-G Datasheet

Current PartRFQ

XC6118C25AGR-G

Torex Semiconductor LtdIn Stock: 885XC6118C25AGR-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6108C25DGR-G are qualified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

Electrical Parameters:

• Single voltage monitoring channel
• 2.5V threshold voltage
• Push-pull, totem pole output configuration
• Active low reset logic
• Operating temperature range of -40°C to 85°C

Mechanical Parameters:

• 4-UDFN exposed pad package
• 4-USP (1.2x1.6) supplier device package
• Surface mount mounting type

Compliance Parameters:

• RoHS3 compliance
• REACH unaffected status
• Moisture sensitivity level 1 (unlimited)

The XC6118C25AGR-G qualifies as a parametric equivalent because it maintains identical electrical specifications, package dimensions, and regulatory compliance across all monitored parameters. The primary distinction between the main part and substitute is the packaging format (tape and reel versus bulk), which does not affect circuit-level functionality or performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6108C25DGR-G and XC6118C25AGR-G are active products with full regulatory compliance. Selection between these parts is determined by packaging and supply chain requirements rather than electrical performance differences.

XC6108C25DGR-G is appropriate for applications requiring bulk packaging formats or when inventory availability in standard packaging is prioritized.

XC6118C25AGR-G is appropriate for high-volume manufacturing environments where tape and reel packaging reduces component handling and automated assembly integration time.

Both parts maintain identical electrical specifications, thermal performance, and compliance certifications. PCB layout, schematic design, and thermal management considerations remain unchanged between the two options. No circuit redesign or validation testing is required when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Are the XC6108C25DGR-G and XC6118C25AGR-G electrically interchangeable?

A: Yes. Both parts are voltage detectors with identical 2.5V threshold voltage, single-channel monitoring, push-pull totem pole output, and active low reset logic. Electrical performance and circuit behavior are equivalent across all specified operating conditions.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The XC6108C25DGR-G is supplied in bulk packaging, while the XC6118C25AGR-G is supplied in tape and reel format. Both use the identical 4-UDFN exposed pad package with 4-USP (1.2x1.6) dimensions.

Q: Can I substitute XC6118C25AGR-G for XC6108C25DGR-G on an existing PCB?

A: Yes. The physical package dimensions, pin configuration, and electrical specifications are identical. No PCB modifications are required.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the XC6108C25DGR-G and XC6118C25AGR-G are RoHS3 compliant with REACH unaffected status.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 85°C ambient temperature range (TA).

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both parts have moisture sensitivity level 1, indicating unlimited shelf life under standard storage conditions.

Q: Which part should I select for automated assembly?

A: The XC6118C25AGR-G in tape and reel format is optimized for automated pick-and-place assembly processes. The XC6108C25DGR-G in bulk packaging is suitable for manual assembly or lower-volume production.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts have identical thermal characteristics and performance specifications across all monitored parameters.