XC6108C18AMR-G Equivalent & Substitute Parts

Part Overview

The XC6108C18AMR-G is an active voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd, classified as a Power Management PMIC. This single-channel voltage detector operates with a 1.8V threshold and provides push-pull, totem pole output configuration. The device is housed in a SOT-25-5 package (SC-74A, SOT-753) and is designed for surface mount applications across industrial temperature ranges of -40°C to 85°C.

The XC6108C18AMR-G maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to address inventory availability, packaging preferences, or supply chain requirements while maintaining functional and electrical compatibility.

Substiute Parts

XC6108C18AMR-G

Torex Semiconductor LtdIn Stock: 921XC6108C18AMR-G Datasheet

Current PartRFQ

XC6118C18AMR-G

Torex Semiconductor LtdIn Stock: 1247XC6118C18AMR-G Datasheet

DirectRFQ

S-1000C18-M5T1U

ABLIC Inc.In Stock: 3806S-1000C18-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA18I-M5T1U

ABLIC Inc.In Stock: 776S-1002CA18I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1003CA18I-M5T1U

ABLIC Inc.In Stock: 1192S-1003CA18I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XC6108C18AMR-G is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Single-channel voltage detector topology
• 1.8V threshold voltage
• Push-pull, totem pole output configuration
• Active low reset functionality
• Operating temperature range: -40°C to 85°C
• Surface mount, SC-74A / SOT-753 package footprint
• RoHS3 compliance
• MSL 1 rating

All substitute parts listed maintain identical electrical specifications and functional characteristics. Variations exist only in manufacturer identity, base product series designation, and packaging format (tape & reel versus cut tape). These packaging differences do not affect electrical performance or circuit-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status with full RoHS3 compliance and REACH unaffected designation. Selection between XC6108C18AMR-G and its equivalents is based on the following factors:

Torex Semiconductor Ltd Devices:

• XC6108C18AMR-G: Primary reference part with 893 units in stock
• XC6118C18AMR-G: Direct Torex equivalent with 1,224 units in stock, supplied in tape & reel packaging format

ABLIC Inc. Devices:

• S-1000C18-M5T1U: Parametric equivalent with 3,703 units in stock, supplied in cut tape format
• S-1002CA18I-M5T1U: Parametric equivalent with 706 units in stock, supplied in cut tape format
• S-1003CA18I-M5T1U: Parametric equivalent with 1,143 units in stock, supplied in cut tape format

All parts share identical electrical specifications, functional behavior, and compliance certifications. Selection is determined by manufacturer preference, packaging format requirements, and inventory availability. The SC-74A / SOT-753 footprint is common across all variants, ensuring direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can XC6108C18AMR-G be directly replaced with XC6118C18AMR-G?

A: Yes. Both devices are manufactured by Torex Semiconductor Ltd and maintain identical electrical specifications, threshold voltage, output configuration, and operating temperature range. The primary difference is packaging format: XC6108C18AMR-G is supplied in standard packaging, while XC6118C18AMR-G is supplied in tape & reel format. Both are pin-compatible and functionally equivalent.

Q: Are ABLIC Inc. parts (S-1000C18-M5T1U, S-1002CA18I-M5T1U, S-1003CA18I-M5T1U) compatible with the XC6108C18AMR-G?

A: Yes. All ABLIC Inc. parts are parametric equivalents with identical voltage threshold (1.8V), output configuration (push-pull, totem pole), reset type (active low), and operating temperature range (-40°C to 85°C). All maintain SC-74A / SOT-753 footprint compatibility and RoHS3 compliance. The supplier device package designation differs (SOT-23-5 versus SOT-25-5), but the physical footprint remains identical.

Q: What is the difference between SOT-25-5 and SOT-23-5 package designations?

A: SOT-25-5 and SOT-23-5 refer to supplier-specific package naming conventions. Both designations correspond to the same SC-74A / SOT-753 physical footprint used across all listed parts. The PCB land pattern and pin spacing are identical, ensuring direct substitution without layout modifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed parts—XC6108C18AMR-G, XC6118C18AMR-G, S-1000C18-M5T1U, S-1002CA18I-M5T1U, and S-1003CA18I-M5T1U—maintain full RoHS3 compliance and REACH unaffected status.

Q: What is the moisture sensitivity level for all parts?

A: All parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Can packaging format (tape & reel versus cut tape) affect circuit performance?

A: No. Packaging format affects only handling, storage, and assembly processes. Electrical performance and functional characteristics remain identical regardless of packaging format.

Q: Which part has the highest inventory availability?

A: S-1000C18-M5T1U (ABLIC Inc.) has the highest inventory with 3,703 units in stock, followed by XC6118C18AMR-G (Torex) with 1,224 units.