XC6108C17AMR-G Equivalent & Substitute Parts

Part Overview

The XC6108C17AMR-G is a single-channel voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device operates as a push-pull, totem pole output supervisor with active low reset functionality, designed for monitoring voltage thresholds at 1.7V. The component is housed in a SOT-25-5 surface mount package and maintains active product status with full RoHS3 compliance and REACH unaffected certification.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct functional replacement in circuit applications without design modification.

Substiute Parts

XC6108C17AMR-G

Torex Semiconductor LtdIn Stock: 836XC6108C17AMR-G Datasheet

Current PartRFQ

S-1002CA17I-M5T1U

ABLIC Inc.In Stock: 4189S-1002CA17I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80817CLMC-B6CT2U

ABLIC Inc.In Stock: 793S-80817CLMC-B6CT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6108C17AMR-G are qualified based on strict parameter alignment across the following critical criteria:

Electrical Parameters:

• Single voltage monitoring channel
• 1.7V threshold voltage
• Push-pull, totem pole output configuration
• Active low reset logic
• Identical operating temperature range (-40°C ~ 85°C)

Mechanical & Environmental Parameters:

• Surface mount technology
• SC-74A / SOT-753 package classification
• RoHS3 compliance
• MSL 1 (Unlimited) moisture sensitivity rating
• REACH unaffected status

Both identified substitute parts (S-1002CA17I-M5T1U and S-80817CLMC-B6CT2U) meet all specified electrical and mechanical requirements. Differences in supplier device package designation (SOT-23-5 vs. SOT-25-5) and manufacturer origin do not affect functional equivalence within the SC-74A / SOT-753 package family classification.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active product status with full regulatory compliance. Selection between XC6108C17AMR-G and its substitutes is determined by availability, lead time, and supply chain requirements rather than functional or electrical differences.

XC6108C17AMR-G (Torex Semiconductor Ltd): Primary specification. 794 units in stock. Torex base product series XC6108.

S-1002CA17I-M5T1U (ABLIC Inc.): Parametric equivalent. 4092 units in stock. ABLIC S-1002 series. Higher inventory availability.

S-80817CLMC-B6CT2U (ABLIC Inc.): Parametric equivalent. 767 units in stock. ABLIC S-808xxC series. Alternative ABLIC sourcing option.

All three parts satisfy RoHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity requirements. No design modification or circuit re-evaluation is required when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA17I-M5T1U directly replace XC6108C17AMR-G in existing designs?

A: Yes. Both parts are single-channel voltage detectors with identical 1.7V threshold, push-pull totem pole output, active low reset, and -40°C to 85°C operating range. Package classification (SC-74A / SOT-753) and all electrical parameters are equivalent.

Q: What is the difference between SOT-25-5 and SOT-23-5 designations?

A: Both designations refer to the same SC-74A / SOT-753 package family. The supplier device package designation varies by manufacturer nomenclature but represents identical physical and electrical package specifications.

Q: Are there any compliance or certification differences between the three parts?

A: No. All three parts are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. No additional qualification or testing is required for substitution.

Q: Which substitute part should be selected based on availability?

A: S-1002CA17I-M5T1U offers the highest inventory (4092 units). S-80817CLMC-B6CT2U provides an alternative ABLIC option (767 units). Selection depends on supply chain lead time and project scheduling requirements.

Q: Is there a performance difference between Torex and ABLIC manufacturers?

A: No performance difference exists within the specified electrical parameters. Both manufacturers produce voltage detector supervisors meeting identical threshold, output, reset, and temperature specifications for this application.