XBP24CDMPIS-001 Equivalent & Substitute Parts

Part Overview

The XBP24CDMPIS-001 is a General ISM > 1GHz Transceiver Module operating at 2.4GHz with integrated trace antenna and surface mount packaging. This module is classified as Obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations. The part integrates the EM357 IC and supports SPI and UART serial interfaces with DSSS modulation at 250kbps data rate.

Substiute Parts

XBP24CDMPIS-001

DigiIn Stock: 758XBP24CDMPIS-001 Datasheet

Current PartRFQ

XB3-24Z8PS

DigiIn Stock: 1359XB3-24Z8PS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XBP24CDMPIS-001 is determined by alignment of the following critical parameters:

Frequency band compatibility at 2.4GHz, DSSS modulation support, 250kbps data rate capability, surface mount module packaging, integrated trace antenna configuration, and operating temperature range of -40°C to 85°C. The substitute part must maintain RoHS compliance and MSL 3 rating. Serial interface support (SPI, UART minimum) and supply voltage overlap (2.7V minimum to 3.6V maximum) are required for functional compatibility.

The XB3-24Z8PS qualifies as a substitute based on these parameters: it operates at 2.4GHz with DSSS modulation and 250kbps data rate, uses surface mount module packaging with integrated trace antenna, supports the required operating temperature range, maintains RoHS compliance and MSL 3 rating, and provides SPI and UART interfaces with compatible supply voltage range (2.1V ~ 3.6V).

Parameter Comparison

Engineering Selection Recommendations

The XB3-24Z8PS is an active product from Digi and serves as the manufacturer-recommended substitute for the obsolete XBP24CDMPIS-001. Both components maintain RoHS compliance and identical MSL 3 ratings, ensuring equivalent environmental and regulatory standing. The substitute provides improved receiver sensitivity (-103dBm versus -101dBm) and marginally higher output power (19dBm versus 18dBm) while maintaining identical data rate and modulation characteristics. Supply voltage range of the substitute extends to 2.1V minimum, providing broader operational flexibility compared to the 2.7V minimum of the original part. Both components are certified for identical operating temperature extremes and support surface mount integration with integrated trace antennas.

Frequently Asked Questions (FAQ)

Q: Can the XB3-24Z8PS directly replace the XBP24CDMPIS-001 in existing designs?

A: The XB3-24Z8PS meets the core substitution criteria: identical 2.4GHz frequency, DSSS modulation, 250kbps data rate, surface mount module packaging, integrated trace antenna, and operating temperature range. Both support SPI and UART interfaces. The substitute provides enhanced receiver sensitivity and output power. Verification of serial interface implementation and supply voltage requirements in the target application is necessary.

Q: What are the key differences between these two modules?

A: The primary differences are product status (obsolete versus active), RF standard classification (General ISM > 1GHz versus 802.15.4 Zigbee®), series designation (XBee-Pro® DigiMesh® 2.4 versus XBee® 3 Zigbee 3), utilized IC (EM357 versus EFR32MG), and memory configuration (substitute includes 1MB Flash and 128kB RAM). The substitute adds I2C interface capability and extends minimum supply voltage to 2.1V. Receiver sensitivity improves by 2dB and output power increases by 1dB.

Q: Are packaging and moisture sensitivity equivalent?

A: Both components use surface mount module packaging with MSL 3 rating (168 hours). The substitute specifies 37-SMD Module packaging versus generic Module designation for the original part. Moisture handling and storage requirements are identical.

Q: What compliance certifications apply to both parts?

A: Both the XBP24CDMPIS-001 and XB3-24Z8PS are RoHS compliant and REACH unaffected. Both share identical ECCN (5A992C) and HTSUS (8517.62.0090) classifications.