XBHAWT-02-0000-0000T40F4 Equivalent & Substitute Parts

Part Overview

The XBHAWT-02-0000-0000T40F4 is a CreeLED XLamp® XB-H series surface mount LED designed for neutral white lighting applications at 4750K color temperature. This component is an active product with full RoHS compliance and REACH unaffected status. Substitute parts may be required due to inventory constraints, design optimization for specific color temperature requirements, or supply chain considerations while maintaining electrical and mechanical compatibility.

Substiute Parts

XBHAWT-02-0000-0000T40F4

CreeLED, Inc.In Stock: 678XBHAWT-02-0000-0000T40F4 Datasheet

Current PartRFQ

XBHAWT-00-0000-0000T40E5

CreeLED, Inc.In Stock: 1786XBHAWT-00-0000-0000T40E5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XBHAWT-02-0000-0000T40F4 is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: CreeLED, Inc.
• Series: XLamp® XB-H
• Forward Voltage (Vf): 2.86V
• Test Current: 700mA
• Maximum Current: 1.5A
• Flux @ 85°C: 250lm (240–260lm range)
• Lumens/Watt @ Test Current: 123 lm/W
• Viewing Angle: 110°
• Package / Case: 1010 (2525 Metric)
• Mounting Type: Surface Mount (SMD)
• Physical Dimensions: 2.45mm × 2.45mm
• Height (Seated Max): 2.41mm
• Thermal Resistance: 4°C/W
• Packaging Format: Tape & Reel (TR)
• RoHS Status: RoHS Compliant
• REACH Status: REACH Unaffected

Variable Parameter (Allows Substitution):

• Color Temperature (CCT): May vary within the neutral white spectrum while maintaining all other electrical and mechanical specifications.

The XBHAWT-00-0000-0000T40E5 qualifies as a parametric equivalent because it maintains identical electrical performance, mechanical form factor, thermal characteristics, and regulatory compliance while offering an alternative color temperature option at 4000K.

Parameter Comparison

Engineering Selection Recommendations

Both the XBHAWT-02-0000-0000T40F4 and XBHAWT-00-0000-0000T40E5 are active products with full RoHS compliance and REACH unaffected status. Selection between these parts should be based on the specific color temperature requirement of the application:

• XBHAWT-02-0000-0000T40F4 (4750K): Select for applications requiring neutral white light at 4750K color temperature.
• XBHAWT-00-0000-0000T40E5 (4000K): Select for applications requiring neutral white light at 4000K color temperature.

Both parts maintain identical electrical performance, mechanical compatibility, thermal characteristics, and regulatory compliance. The choice between them is determined solely by the color temperature specification of the end application. Current inventory availability is 625 units for the 4750K variant and 1694 units for the 4000K variant.

Frequently Asked Questions (FAQ)

Q: Can XBHAWT-00-0000-0000T40E5 be used as a direct replacement for XBHAWT-02-0000-0000T40F4?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical forward voltage, current ratings, flux output, viewing angle, package dimensions, and thermal characteristics. The only difference is color temperature: 4000K versus 4750K. Substitution is valid if the application can accommodate the 4000K color temperature specification.

Q: Are there any PCB layout or assembly considerations when switching between these parts?

A: No. Both parts use identical 1010 (2525 Metric) surface mount packages with the same footprint, height, and thermal resistance. PCB layouts and reflow profiles remain unchanged.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both XBHAWT-02-0000-0000T40F4 and XBHAWT-00-0000-0000T40E5 are RoHS Compliant and REACH Unaffected, with identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications.

Q: What is the primary difference between these two part numbers?

A: The primary difference is color temperature. XBHAWT-02-0000-0000T40F4 operates at 4750K (warmer neutral white), while XBHAWT-00-0000-0000T40E5 operates at 4000K (cooler neutral white). All other specifications are identical.

Q: Can I mix these parts in the same production batch?

A: Mixing is not recommended if color temperature consistency is critical to the end application. If color temperature variation is acceptable within the 4000K to 4750K range, both parts may be used interchangeably from an electrical and mechanical perspective.