XBC-M5-UT-001 Equivalent & Substitute Parts

Part Overview

The XBC-M5-UT-001 is a Cellular 2G/3G HSPA+ (AT&T) Transceiver Module manufactured by Digi, part of the XBee® 3 Cellular series. This through-hole module operates across 800MHz, 900MHz, 1.8GHz, 1.9GHz, and 2.1GHz frequency bands with a maximum data rate of 7.2Mbps and output power of 24dBm. The module features U.FL antenna connector and supports SPI and UART serial interfaces.

The XBC-M5-UT-001 is classified as Obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure supply chain continuity, and support legacy device maintenance and upgrades.

Substiute Parts

XBC-M5-UT-001

DigiIn Stock: 1103XBC-M5-UT-001 Datasheet

Current PartRFQ

XB3-C-A2-UT-002

DigiIn Stock: 847XB3-C-A2-UT-002 Datasheet

MFR RecommendedRFQ

XB3-C-G1-UT-001

DigiIn Stock: 882XB3-C-G1-UT-001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XBC-M5-UT-001 are identified based on the following criteria:

Primary Substitution Criteria:

• Manufacturer: Digi (same manufacturer ensures protocol compatibility and firmware support)
• Module Category: RF Transceiver Module
• Voltage Supply Range: Compatible with 2.7V ~ 5.5V supply
• Operating Temperature: -40°C ~ 80°C range
• Serial Interface Support: Minimum SPI and/or UART capability
• RoHS and REACH Compliance: Maintained across substitutes
• ECCN and HTSUS Classification: Consistent regulatory classification

Identified Substitutes:

1. XB3-C-G1-UT-001 (Primary Substitute) - Active product status, XBee® 3 Cellular series, expanded protocol support (Bluetooth, GNSS, LTE), enhanced data rate (10Mbps), higher output power (33dBm), surface mount configuration, extended serial interfaces (I2C, JTAG, SPI, UART, USB), integrated antenna with U.FL option.

2. XB3-C-A2-UT-002 (Secondary Substitute) - Active product status, XBee® 3 series base, cellular transceiver module, limited specification data available.

Parameter Comparison

Engineering Selection Recommendations

XB3-C-G1-UT-001 Selection Criteria:

This substitute is classified as Active product status, ensuring ongoing manufacturer support and availability. It maintains ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements. The module supports the same operating temperature range (-40°C ~ 80°C) and maintains voltage supply compatibility within the specified range (2.8V ~ 5.5V).

Key technical differences include surface mount mounting versus through-hole configuration, expanded protocol support (Bluetooth, GNSS, LTE versus 2G/3G HSPA+), and enhanced data rate (10Mbps versus 7.2Mbps). The XB3-C-G1-UT-001 provides extended serial interface options (I2C, JTAG, SPI, UART, USB) and integrated antenna capability with U.FL connector option.

XB3-C-A2-UT-002 Selection Criteria:

This substitute is classified as Active product status. Complete technical specifications are not provided in available documentation. Selection of this part requires verification of compatibility parameters against system requirements.

Frequently Asked Questions (FAQ)

Q: Can XB3-C-G1-UT-001 directly replace XBC-M5-UT-001 in existing designs?

A: Direct replacement requires evaluation of mounting type compatibility. XBC-M5-UT-001 uses through-hole mounting, while XB3-C-G1-UT-001 uses surface mount. PCB layout modifications are necessary. Protocol differences (2G/3G HSPA+ versus Bluetooth/GNSS/LTE) require system-level assessment.

Q: What are the voltage supply compatibility considerations?

A: XBC-M5-UT-001 operates at 2.7V ~ 5.5V. XB3-C-G1-UT-001 operates at 2.8V ~ 5.5V. Systems operating below 2.8V require alternative substitutes or voltage regulation modifications.

Q: Are antenna connectors compatible between substitute parts?

A: XBC-M5-UT-001 features U.FL through-hole connector. XB3-C-G1-UT-001 features integrated antenna with U.FL option. Antenna compatibility depends on specific connector type and mechanical form factor of the integrated antenna.

Q: What compliance certifications are maintained across substitutes?

A: All listed substitutes maintain REACH Unaffected status. RoHS compliance is maintained: XBC-M5-UT-001 is RoHS Compliant; XB3-C-G1-UT-001 is ROHS3 Compliant. ECCN and HTSUS classifications remain consistent (5A992C and 8517.62.0090 respectively).

Q: How do serial interface differences affect system integration?

A: XBC-M5-UT-001 supports SPI and UART. XB3-C-G1-UT-001 supports I2C, JTAG, SPI, UART, and USB. Existing designs using only SPI and UART are compatible. Designs requiring specific interface protocols must verify support in the substitute module.

Q: What is the impact of data rate differences?

A: XBC-M5-UT-001 provides 7.2Mbps maximum data rate. XB3-C-G1-UT-001 provides 10Mbps maximum data rate. This represents an increase in throughput capability. System designs dependent on specific data rate limitations require functional assessment.