XAM5718ABCXE Equivalent & Substitute Parts

Part Overview

The XAM5718ABCXE is an ARM® Cortex®-A15 Microprocessor IC from Texas Instruments' Sitara™ series, featuring 1 core, 32-bit architecture, and 1.5GHz clock speed in a 760-FCBGA (23x23) package. This part is classified as obsolete, making identification of suitable substitutes essential for ongoing system support and new design implementations. The primary substitute maintains core processor architecture and performance specifications while offering active product status.

Substiute Parts

XAM5718ABCXE

Texas InstrumentsIn Stock: 1055XAM5718ABCXE Datasheet

Current PartRFQ

AM5718ABCXE

Texas InstrumentsIn Stock: 966AM5718ABCXE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XAM5718ABCXE is determined by the following critical parameters:

• Core Processor Architecture: ARM® Cortex®-A15 (mandatory match)
• Core Count & Bus Width: 1 Core, 32-Bit (mandatory match)
• Clock Speed: 1.5GHz (mandatory match)
• Package & Pinout: 760-FCBGA (23x23) (mandatory match)
• Voltage Specifications: 1.8V, 3.3V I/O (mandatory match)
• Operating Temperature Range: 0°C ~ 90°C (TJ) (mandatory match)
• Mounting Technology: Surface Mount (mandatory match)
• Compliance Standards: ROHS3 Compliant, MSL 3 (mandatory match)

The AM5718ABCXE qualifies as a direct substitute based on identical alignment across all critical electrical, mechanical, and environmental parameters.

Parameter Comparison

Engineering Selection Recommendations

The AM5718ABCXE is the direct substitute for XAM5718ABCXE. Both parts are manufactured by Texas Instruments and maintain identical electrical specifications, package geometry, and environmental operating parameters. The primary distinction is product lifecycle status: XAM5718ABCXE is obsolete while AM5718ABCXE carries active product status, ensuring continued availability and manufacturer support.

For new designs or system replacements, AM5718ABCXE is the appropriate selection. For legacy system maintenance where XAM5718ABCXE inventory exists, both parts are functionally interchangeable within the same PCB footprint and system architecture.

Both parts comply with ROHS3 standards and carry identical moisture sensitivity ratings (MSL 3, 168 Hours), confirming equivalent handling and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can AM5718ABCXE directly replace XAM5718ABCXE in existing designs?

A: Yes. Both parts share identical core processor architecture (ARM® Cortex®-A15), clock speed (1.5GHz), package type (760-FCBGA 23x23), voltage specifications (1.8V, 3.3V), and operating temperature range (0°C ~ 90°C). PCB footprint and pinout are identical, requiring no design modifications.

Q: What is the primary difference between these two parts?

A: Product status. XAM5718ABCXE is classified as obsolete, while AM5718ABCXE maintains active product status from Texas Instruments. This affects long-term availability and manufacturer support.

Q: Are there differences in interface capabilities?

A: The main part includes HDMI display interface; the substitute does not list this interface. Both parts support identical Ethernet (10/100Mbps), SATA (3Gbps), USB (2.0 and 3.0), and additional interfaces (CAN, EBI/EMI, HDQ/1-Wire®, I2C, McASP, McSPI, MMC/SD/SDIO, PCIe, QSPI, UART).

Q: Do both parts require identical PCB handling procedures?

A: Yes. Both parts carry MSL 3 (168 Hours) moisture sensitivity ratings and ROHS3 compliance, requiring identical storage, handling, and reflow procedures.

Q: Which part should be specified for new production?

A: AM5718ABCXE should be specified for new designs and production runs due to active product status and guaranteed manufacturer availability.