XA-M14-CS3P-W Equivalent & Substitute Parts

Part Overview

The XA-M14-CS3P-W is an RF adapter manufactured by Digi, operating at 2.4GHz with DSSS and ISM modulation protocols. This adapter provides RS-485 interface connectivity with a maximum data rate of 250kbps and operates within a 3V to 6V supply voltage range. The product is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing system integration and component procurement.

Substiute Parts

XA-M14-CS3P-W

DigiIn Stock: 974XA-M14-CS3P-W Datasheet

Current PartRFQ

AC182015-1

Microchip TechnologyIn Stock: 981AC182015-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XA-M14-CS3P-W is determined by the following critical parameters:

• Frequency Band: 2.4GHz ISM band operation
• Function: RF adapter for wireless connectivity
• Interface Type: Connection protocol (RS-485 for primary part)
• Modulation Protocol: ISM-based wireless standards
• Supply Voltage Compatibility: Operating voltage range
• Product Status: Active status preferred for ongoing availability

The AC182015-1 from Microchip Technology operates within the same 2.4GHz ISM frequency band and serves the adapter function. However, this substitute employs a USB interface rather than RS-485, representing a functional alternative for applications where USB connectivity is acceptable.

Parameter Comparison

Engineering Selection Recommendations

The AC182015-1 qualifies as a functional substitute based on shared 2.4GHz ISM frequency operation and adapter classification. Both components maintain identical Moisture Sensitivity Level (MSL) ratings and REACH compliance status, ensuring equivalent environmental handling and regulatory requirements.

The primary distinction lies in interface protocol: the XA-M14-CS3P-W provides RS-485 serial communication, while the AC182015-1 provides USB connectivity. Selection of the AC182015-1 requires system architecture compatibility with USB interface standards. The AC182015-1 maintains active product status, ensuring continued availability and manufacturer support compared to the obsolete XA-M14-CS3P-W.

Frequently Asked Questions (FAQ)

Q: Can the AC182015-1 directly replace the XA-M14-CS3P-W in existing systems?

A: Direct replacement requires interface compatibility verification. The AC182015-1 uses USB connectivity whereas the XA-M14-CS3P-W uses RS-485. System integration feasibility depends on host device USB port availability and software driver support for the Zena™ series adapter.

Q: What are the key compatibility criteria for this substitution?

A: Both adapters operate within the 2.4GHz ISM frequency band and serve RF adapter functions. Compatibility is determined by interface protocol acceptance (USB versus RS-485), supply voltage availability (5VDC USB for AC182015-1 versus 3V-6V for XA-M14-CS3P-W), and application-specific wireless protocol requirements.

Q: Why is the XA-M14-CS3P-W classified as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The AC182015-1 maintains active status, providing assured supply chain continuity and ongoing technical support from Microchip Technology.

Q: Are there environmental or compliance differences between these adapters?

A: Both components share identical Moisture Sensitivity Level (MSL) ratings of 1 (Unlimited) and REACH Unaffected status, indicating equivalent environmental handling requirements and regulatory compliance profiles.

Q: What supply voltage considerations apply to substitution?

A: The XA-M14-CS3P-W operates from 3V to 6V, providing flexible supply options. The AC182015-1 requires 5VDC USB power, necessitating USB host port availability. System power architecture must accommodate this requirement.