XA-M14-CS2P-A Equivalent & Substitute Parts

Part Overview

The XA-M14-CS2P-A is an RF adapter manufactured by Digi, operating in the 2.4GHz ISM band with multi-interface support including RS-232, RS-485, USB, Digital, and Analog connectivity. This XBee-Pro® series adapter delivers 250kbps maximum data rate with -100dBm sensitivity and 18dBm output power. The product is currently classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing system integration and maintenance applications.

Substiute Parts

XA-M14-CS2P-A

DigiIn Stock: 1073XA-M14-CS2P-A Datasheet

Current PartRFQ

AC182015-1

Microchip TechnologyIn Stock: 981AC182015-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XA-M14-CS2P-A is determined by the following core parameters:

• Frequency Band: 2.4GHz ISM operation
• Modulation/Protocol: ISM-based wireless communication
• Function: RF adapter capability
• Interface Compatibility: Support for wireless connectivity in general-purpose applications

The identified substitute part AC182015-1 shares the primary functional characteristics of 2.4GHz ISM RF adapter operation. However, interface configuration differs: the XA-M14-CS2P-A provides multi-interface support (RS-232, RS-485, USB, Digital, Analog), while AC182015-1 provides USB-only interface. Substitution feasibility depends on whether the target application requires the specific multi-interface capability of the original part or can operate with USB-only connectivity.

Parameter Comparison

Engineering Selection Recommendations

The AC182015-1 represents an active-status alternative to the obsolete XA-M14-CS2P-A within the 2.4GHz ISM RF adapter category. Both parts maintain identical REACH and ECCN compliance classifications, ensuring regulatory equivalence for export and environmental compliance purposes.

Selection of AC182015-1 as a substitute is appropriate for applications requiring USB-only interface connectivity. Applications dependent on RS-232, RS-485, Digital, or Analog interface options present in the original XA-M14-CS2P-A require evaluation of whether AC182015-1's USB-only interface satisfies system requirements or whether alternative multi-interface adapters must be sourced.

The transition from XBee-Pro® series (Digi) to Zena™ series (Microchip Technology) represents a manufacturer platform change and requires confirmation of protocol and firmware compatibility with existing system architecture.

Frequently Asked Questions (FAQ)

Q: Can AC182015-1 directly replace XA-M14-CS2P-A in all applications?

A: Direct replacement is limited by interface differences. AC182015-1 provides USB connectivity only, while XA-M14-CS2P-A supports RS-232, RS-485, USB, Digital, and Analog interfaces. Substitution is valid only for applications utilizing USB interface exclusively.

Q: What compliance certifications are shared between these parts?

A: Both parts maintain REACH Unaffected status and identical ECCN classification (5A992C), ensuring equivalent regulatory treatment for procurement and export purposes.

Q: Are there supply voltage compatibility considerations?

A: XA-M14-CS2P-A operates on 3.7V to 6V supply range, while AC182015-1 requires 5VDC USB power. System power architecture must accommodate USB power delivery specifications.

Q: Does the series change from XBee-Pro® to Zena™ affect compatibility?

A: Series designation indicates different manufacturer platforms. Protocol and firmware compatibility must be verified against specific system requirements before substitution.

Q: What is the inventory status for these parts?

A: XA-M14-CS2P-A (Obsolete): 1034 pcs available. AC182015-1 (Active): 968 pcs available. Active product status of AC182015-1 provides ongoing availability assurance compared to obsolete status of the original part.