WR15AL/V Rocker Switch SPDT 15A 125V - Equivalent & Substitute Parts

Part Overview

The WR15AL/V is a rocker switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with On-Mom switch function. This panel mount, snap-in component is rated for 15A at 125V AC and 30V DC, featuring a concave black actuator and wire lead termination. The part is currently listed as obsolete, making identification of equivalent alternatives necessary for ongoing system maintenance and component procurement.

Substiute Parts

WR15AL/V

NKK SwitchesIn Stock: 854WR15AL/V Datasheet

Current PartRFQ

WR15AL

NKK SwitchesIn Stock: 928WR15AL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the WR15AL/V is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom)
• Current rating (15A AC/DC)
• Voltage ratings (125V AC, 30V DC)
• Mounting type (Panel Mount, Snap-In)
• Panel cutout dimensions (Rectangular - 34.20mm x 17.20mm)
• Actuator type and color (Concave, Black)
• Termination style (Wire Leads)
• Ingress protection rating (IP67)
• Operating temperature range (-25°C to 85°C)
• Approval certifications (EN, UL)

Only components matching all these parameters across electrical, mechanical, and environmental specifications qualify as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The WR15AL is the direct equivalent substitute for the obsolete WR15AL/V. Both components are manufactured by NKK Switches within the WR series and maintain identical electrical, mechanical, and environmental specifications. The primary distinction is product status: WR15AL/V is obsolete while WR15AL is active and currently in production.

The WR15AL substitute offers additional compliance documentation: ROHS3 compliance and REACH unaffected status, providing enhanced regulatory alignment for new designs and procurement cycles. Both parts carry EN and UL approvals, ensuring equivalent certification standing.

For applications requiring the WR15AL/V, the WR15AL provides direct functional and physical compatibility without design modification or panel cutout alteration.

Frequently Asked Questions (FAQ)

Q: Can WR15AL replace WR15AL/V in existing installations?

A: Yes. The WR15AL is a direct substitute with identical electrical ratings (15A at 125V AC, 30V DC), circuit configuration (SPDT), switch function (On-Mom), mounting specifications (Panel Mount, Snap-In), and panel cutout dimensions (34.20mm x 17.20mm). Physical and functional compatibility is complete.

Q: What is the difference between WR15AL/V and WR15AL?

A: The components are electrically and mechanically identical. The primary difference is product status: WR15AL/V is obsolete, while WR15AL is active. WR15AL additionally carries ROHS3 compliance and REACH unaffected documentation.

Q: Are there packaging differences between these parts?

A: WR15AL/V packaging is listed as dash (unspecified), while WR15AL is supplied in bulk packaging. Both use wire lead termination. Confirm packaging requirements with your procurement specification.

Q: Do both parts meet the same environmental and operational standards?

A: Yes. Both WR15AL/V and WR15AL operate across -25°C to 85°C, maintain IP67 ingress protection (dust tight, waterproof), and achieve 30,000 mechanical cycles and 10,000 electrical cycles. Both carry EN and UL approvals.

Q: Is the WR15AL suitable for new designs?

A: Yes. WR15AL is active product status with current manufacturing support, ROHS3 compliance, and REACH unaffected designation, making it appropriate for new design implementation.