WR06X623 JTL Equivalent & Substitute Parts

Part Overview

The WR06X623 JTL is a 62 kOhms ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) surface mount package manufactured by Walsin Technology Corporation. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when original manufacturer inventory is unavailable, when supply chain constraints occur, or when design flexibility permits component sourcing from alternative qualified manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

WR06X623 JTL

Walsin Technology CorporationIn Stock: 755WR06X623 JTL Datasheet

Current PartRFQ

CR16623J

MeritekIn Stock: 31091CR16623J Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the WR06X623 JTL are qualified based on strict equivalence across the following parameters:

• Resistance Value: 62 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 0.1W / 1/10W (exact match required)
• Package: 0603 (1608 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Regulatory Compliance: RoHS3 Compliant, REACH Unaffected (exact match required)

The CR16623J from Meritek meets all specified parameters and qualifies as a direct substitute. Both components share identical electrical characteristics, mechanical dimensions, and regulatory certifications, enabling interchangeable use in applications requiring 62 kOhm 5% tolerance 0603 thick film resistors.

Parameter Comparison

Engineering Selection Recommendations

Both the WR06X623 JTL and CR16623J are Active status components with full RoHS3 compliance and REACH unaffected certification. Selection between these parts is determined by availability and supply chain requirements rather than electrical or mechanical performance differences. The CR16623J exhibits a maximum seated height of 0.022" (0.55mm) compared to 0.024" (0.60mm) for the WR06X623 JTL, representing a 0.002" (0.05mm) reduction. This dimensional variance remains within typical PCB assembly tolerances and does not restrict interchangeability in standard applications. Both components operate across the identical temperature range of -55°C to 155°C and maintain equivalent thermal stability through ±100ppm/°C temperature coefficient specifications. Component selection should prioritize inventory availability and lead time requirements while maintaining compliance with design specifications for 62 kOhm 5% tolerance 0603 thick film resistor applications.

Frequently Asked Questions (FAQ)

Q: Can the CR16623J replace the WR06X623 JTL in existing designs?

A: Yes. The CR16623J meets all electrical and mechanical specifications of the WR06X623 JTL, including resistance value, tolerance, power rating, package dimensions, and operating temperature range. Both components are RoHS3 compliant with identical regulatory certifications.

Q: What is the significance of the height difference between these parts?

A: The CR16623J maximum seated height is 0.022" (0.55mm) versus 0.024" (0.60mm) for the WR06X623 JTL. This 0.002" (0.05mm) difference is within standard PCB assembly tolerances and does not affect component placement or circuit performance.

Q: Are both parts suitable for the same operating temperature applications?

A: Yes. Both the WR06X623 JTL and CR16623J operate across -55°C to 155°C with identical ±100ppm/°C temperature coefficient specifications, ensuring equivalent thermal performance in all rated operating conditions.

Q: What packaging format is used for these components?

A: Both parts are supplied in Tape & Reel (TR) packaging in 0603 (1608 Metric) surface mount format, compatible with standard automated assembly equipment.

Q: Do these parts meet current regulatory requirements?

A: Yes. Both the WR06X623 JTL and CR16623J are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic component manufacturing and use.

Q: What tolerance specification applies to these resistors?

A: Both components carry ±5% tolerance on the 62 kOhm resistance value, providing equivalent accuracy for circuit design calculations and performance specifications.