WR06X511 JTL Equivalent & Substitute Parts

Part Overview

The WR06X511 JTL is a 510 Ohms ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) surface mount package manufactured by Walsin Technology Corporation. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and packaging standards align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

WR06X511 JTL

Walsin Technology CorporationIn Stock: 1131WR06X511 JTL Datasheet

Current PartRFQ

ERJ-3GEYJ511V

Panasonic Electronic ComponentsIn Stock: 440764ERJ-3GEYJ511V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the WR06X511 JTL is determined by strict alignment of the following parameters:

Electrical Specifications:

• Resistance value: 510 Ohms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)

Mechanical & Package Specifications:

• Package type: 0603 (1608 Metric)
• Composition: Thick Film
• Number of terminations: 2

Environmental & Compliance:

• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The ERJ-3GEYJ511V from Panasonic Electronic Components meets all substitution criteria. Both components share identical resistance, tolerance, power rating, package dimensions, and environmental operating parameters. Substitution is valid based on these matching specifications.

Parameter Comparison

Engineering Selection Recommendations

WR06X511 JTL (Walsin Technology Corporation):

• Primary selection for standard industrial applications
• Active product status with established supply chain
• RoHS3 compliant with unlimited moisture sensitivity rating
• Temperature coefficient of ±100ppm/°C provides tighter thermal stability

ERJ-3GEYJ511V (Panasonic Electronic Components):

• Qualified for automotive applications under AEC-Q200 standard
• Active product status with high inventory availability
• RoHS3 compliant with unlimited moisture sensitivity rating
• Temperature coefficient of ±200ppm/°C suitable for general-purpose applications
• Seated height of 0.022" (0.55mm) provides 0.002" (0.05mm) lower profile than primary part

Both components are functionally equivalent for direct substitution in 0603 package applications requiring 510 Ohms ±5% at 0.1W power rating within the -55°C to 155°C operating range.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3GEYJ511V replace WR06X511 JTL in all applications?

A: Yes, for applications within the specified electrical and environmental parameters. Both components share identical resistance, tolerance, power rating, package dimensions, and operating temperature range. The ERJ-3GEYJ511V includes automotive AEC-Q200 qualification, making it suitable for automotive and industrial environments.

Q: What is the difference in temperature coefficient between these parts?

A: The WR06X511 JTL has a temperature coefficient of ±100ppm/°C, while the ERJ-3GEYJ511V has ±200ppm/°C. For applications requiring tighter thermal stability, the WR06X511 JTL provides superior performance. For general-purpose applications, both coefficients are acceptable within the -55°C to 155°C operating range.

Q: Are there physical dimension differences that affect PCB layout?

A: The seated height differs by 0.002" (0.05mm), with the ERJ-3GEYJ511V at 0.022" (0.55mm) maximum and the WR06X511 JTL at 0.024" (0.60mm) maximum. Both fit the 0603 (1608 Metric) package footprint. This minimal difference does not affect standard PCB design or assembly processes.

Q: Do both parts meet RoHS and moisture sensitivity requirements?

A: Yes. Both components are ROHS3 compliant and rated at Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Which part should be selected for new designs?

A: Selection depends on application requirements. For automotive applications, the ERJ-3GEYJ511V with AEC-Q200 qualification is appropriate. For industrial or consumer applications, either component is suitable based on availability and thermal stability requirements.