WR06X364 JTL Equivalent & Substitute Parts

Part Overview

The WR06X364 JTL is a 360 kOhms ±5% thick film chip resistor manufactured by Walsin Technology Corporation in the 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and operates across a temperature range of -55°C to 155°C. The part is currently in active production status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications are maintained across alternative manufacturers.

Substiute Parts

WR06X364 JTL

Walsin Technology CorporationIn Stock: 1001WR06X364 JTL Datasheet

Current PartRFQ

CR16364J

MeritekIn Stock: 51144CR16364J Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the WR06X364 JTL are qualified based on strict equivalence across the following critical parameters:

• Resistance Value: 360 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 0.1W / 1/10W (exact match required)
• Package Format: 0603 (1608 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

The CR16364J from Meritek meets all substitution criteria and maintains functional and mechanical compatibility with the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the WR06X364 JTL and CR16364J are active production components with identical electrical and mechanical specifications. Selection between these parts is based on availability, supply chain considerations, and procurement requirements rather than technical performance differences.

The CR16364J from Meritek offers higher inventory availability (51,132 pieces in stock) compared to the WR06X364 JTL (964 pieces in stock), which may influence lead time and supply continuity decisions.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in applications subject to environmental restrictions. The maximum seated height difference of 0.002" (0.05mm) between the two parts is negligible for standard PCB assembly processes and does not impact functional performance or board layout considerations.

Frequently Asked Questions (FAQ)

Q: Can the CR16364J be used as a direct replacement for the WR06X364 JTL?

A: Yes. The CR16364J meets all electrical and mechanical specifications required for direct substitution. Both parts share identical resistance value, tolerance, power rating, package format, temperature coefficient, and operating temperature range.

Q: Are there any dimensional differences between these parts?

A: The maximum seated height differs by 0.002" (0.05mm), with the CR16364J measuring 0.022" (0.55mm) and the WR06X364 JTL measuring 0.024" (0.60mm). This difference is within standard PCB assembly tolerances and does not affect circuit performance or board layout.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the WR06X364 JTL and CR16364J are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements for restricted substance use.

Q: What is the moisture sensitivity rating for these parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are these parts suitable for high-temperature applications?

A: Yes. Both parts operate across the temperature range of -55°C to 155°C with a temperature coefficient of ±100ppm/°C, making them suitable for industrial and extended temperature applications.

Q: Can these parts be used interchangeably in automated assembly processes?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging format and share identical 0603 package specifications, enabling seamless integration into standard SMD assembly workflows.