WR06X362 JTL Equivalent & Substitute Parts

Part Overview

The WR06X362 JTL is a 3.6 kOhms ±5% thick film chip resistor manufactured by Walsin Technology Corporation in 0603 (1608 Metric) surface mount package format. This component is rated for 0.1W (1/10W) power dissipation and operates across the temperature range of -55°C to 155°C. The part is currently in active production status and is RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications are matched across alternative manufacturers, enabling procurement flexibility and supply chain continuity.

Substiute Parts

WR06X362 JTL

Walsin Technology CorporationIn Stock: 967WR06X362 JTL Datasheet

Current PartRFQ

CR16362J

MeritekIn Stock: 20879CR16362J Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the WR06X362 JTL are identified based on strict equivalence across the following critical parameters:

Electrical Specifications:

• Resistance value: 3.6 kOhms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package type: 0603 (1608 Metric)
• Physical dimensions: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Certifications:

• RoHS3 Compliant
• REACH Unaffected
• Moisture Sensitivity Level 1 (Unlimited)

The CR16362J from Meritek meets all electrical, mechanical, and compliance requirements for direct substitution with the WR06X362 JTL.

Parameter Comparison

Engineering Selection Recommendations

Both the WR06X362 JTL and CR16362J are active production components with identical electrical and mechanical specifications. Selection between these parts is based on availability, supply chain requirements, and procurement preferences.

WR06X362 JTL (Walsin Technology Corporation):

• Current inventory: 953 pieces
• Seated height: 0.024" (0.60mm)
• Suitable for applications requiring Walsin sourcing or existing supply agreements

CR16362J (Meritek):

• Current inventory: 20,856 pieces
• Seated height: 0.022" (0.55mm)
• Suitable for applications requiring higher inventory availability or Meritek sourcing

Both parts satisfy RoHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity requirements. The marginal difference in seated height (0.002" / 0.05mm) is within standard PCB assembly tolerances and does not affect functional performance or board-level compatibility.

Frequently Asked Questions (FAQ)

Q: Can CR16362J be used as a direct replacement for WR06X362 JTL?

A: Yes. The CR16362J meets all electrical specifications (3.6 kOhms ±5%, 0.1W, ±100ppm/°C, -55°C ~ 155°C), mechanical requirements (0603 package, 1.60mm x 0.80mm), and compliance certifications (RoHS3, REACH unaffected, MSL 1) required for direct substitution.

Q: Are there dimensional compatibility concerns between these parts?

A: Both parts conform to the 0603 (1608 Metric) package standard with identical length and width (0.063" x 0.031" / 1.60mm x 0.80mm). The seated height difference of 0.002" (0.05mm) is within standard PCB assembly tolerances and does not impact board-level placement or functionality.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both WR06X362 JTL and CR16362J are RoHS3 compliant, REACH unaffected, and rated MSL 1 (unlimited moisture sensitivity). They are suitable for equivalent applications in regulated environments.

Q: What is the basis for substitution between these parts?

A: Substitution is based on matching resistance value (3.6 kOhms), tolerance (±5%), power rating (0.1W), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), package type (0603), composition (thick film), and compliance certifications (RoHS3, REACH, MSL 1).

Q: Are there inventory differences between the two parts?

A: Yes. WR06X362 JTL has 953 pieces in stock, while CR16362J has 20,856 pieces available. Selection may depend on procurement lead time requirements and supply chain strategy.