WR06X2002FTL Equivalent & Substitute Parts

Part Overview

The WR06X2002FTL is a 20 kOhms ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Walsin Technology Corporation. This component is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1). The part is supplied in Tape & Reel packaging format.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

WR06X2002FTL

Walsin Technology CorporationIn Stock: 1067WR06X2002FTL Datasheet

Current PartRFQ

ERJ-3EKF2002V

Panasonic Electronic ComponentsIn Stock: 626372ERJ-3EKF2002V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the WR06X2002FTL is determined by strict equivalence across the following parameters:

Electrical Specifications:

• Resistance value: 20 kOhms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package type: 0603 (1608 Metric)
• Number of terminations: 2
• Physical dimensions: 0.063" L x 0.031" W (1.60mm x 0.80mm)

Compliance & Environmental:

• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)
• REACH unaffected status

The ERJ-3EKF2002V from Panasonic Electronic Components meets all specified electrical and mechanical parameters. This substitute maintains identical resistance, tolerance, power rating, temperature coefficient, and operating temperature range. Both components utilize thick film composition and are housed in 0603 package format with equivalent termination configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the WR06X2002FTL and ERJ-3EKF2002V are Active status components with full RoHS3 compliance and REACH unaffected designation, confirming regulatory alignment for current manufacturing and deployment.

The ERJ-3EKF2002V incorporates AEC-Q200 automotive qualification, providing additional reliability assurance for applications requiring automotive-grade component specifications. This qualification does not restrict use in non-automotive applications and represents an enhanced reliability profile.

Seated height differential of 0.002" (0.05mm) between the two components is within standard PCB assembly tolerances and does not impact board-level compatibility or reflow processing parameters.

Both components are supplied in standard packaging formats (Tape & Reel for WR06X2002FTL; Cut Tape & Digi-Reel for ERJ-3EKF2002V) suitable for automated assembly operations.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF2002V directly replace WR06X2002FTL in existing designs?

A: Yes. Both components share identical electrical specifications (20 kOhms ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C), mechanical package (0603), and compliance certifications (RoHS3, REACH unaffected). No circuit design modification is required.

Q: What is the significance of AEC-Q200 qualification on the ERJ-3EKF2002V?

A: AEC-Q200 is an automotive industry reliability standard. This qualification indicates the component meets enhanced testing and quality requirements. The qualification does not restrict application to automotive use only; it represents a higher reliability assurance level applicable to any application domain.

Q: Are there packaging format differences between these parts?

A: The WR06X2002FTL is supplied in Tape & Reel (TR) format. The ERJ-3EKF2002V is supplied in Cut Tape (CT) and Digi-Reel format. Both formats are compatible with standard automated assembly equipment. Format selection depends on production volume and assembly line configuration.

Q: Is the 0.002" height difference between components significant?

A: No. The seated height difference (0.024" versus 0.022") is 0.002" (0.05mm) and falls within standard PCB assembly process tolerances. This variance does not affect reflow soldering, component placement accuracy, or board-level clearance requirements.

Q: Do both components have identical moisture sensitivity ratings?

A: Yes. Both components are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling procedures apply without special dry-pack or bake-out requirements.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both components are RoHS3 compliant and REACH unaffected. Regulatory status is equivalent for all jurisdictions and application categories.