Kingbright WP934GE/2GD LED Circuit Board Indicator Equivalent & Substitute Parts

Part Overview

The Kingbright WP934GE/2GD is a dual-level green LED circuit board indicator designed for through-hole, right-angle mounting applications. This 3mm T-1 form factor component features a diffused, tinted lens with domed top and operates at 2.2V with 25mA current rating. The part is classified as Active product status and maintains full compliance with RoHS3 and REACH regulations. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical or functionally compatible dual-level green LED indicators.

Substiute Parts

WP934GE/2GD

KingbrightIn Stock: 1725WP934GE/2GD Datasheet

Current PartRFQ

WP934CA/2GD-90

KingbrightIn Stock: 1854WP934CA/2GD-90 Datasheet

DirectRFQ

WP934GO/2GD

KingbrightIn Stock: 1767WP934GO/2GD Datasheet

DirectRFQ

WP934MD/2GD

KingbrightIn Stock: 3982WP934MD/2GD Datasheet

DirectRFQ

WP934EB/2GD

KingbrightIn Stock: 7399WP934EB/2GD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the WP934GE/2GD are classified into two categories based on electrical and mechanical parameter alignment:

Direct Substitutes (Identical Electrical and Mechanical Specifications): WP934CA/2GD-90, WP934GO/2GD, and WP934MD/2GD maintain complete parameter equivalence with the main part. These components share identical current rating (25mA), millicandela rating (30mcd), voltage rating (2.2V), wavelength (565nm), lens configuration, mounting type, and form factor. All three parts are manufactured by Kingbright under the WP934 base product number and comply with identical regulatory standards (RoHS3, REACH).

Similar Part (Reduced Current and Brightness): WP934EB/2GD is classified as a similar part with functional compatibility but reduced electrical specifications. This component operates at 20mA current rating with 22.5mcd brightness output, compared to the 25mA and 30mcd specifications of the main part. All other parameters—voltage rating, wavelength, lens type, mounting configuration, and form factor—remain identical. This part is suitable for applications where lower current draw and reduced brightness are acceptable.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution (Identical Performance): WP934CA/2GD-90, WP934GO/2GD, and WP934MD/2GD are direct substitutes for WP934GE/2GD. All three parts maintain identical electrical characteristics (25mA, 30mcd, 2.2V) and mechanical specifications (3mm T-1 through-hole right-angle mounting). Selection among these three direct substitutes may be based on inventory availability and procurement lead times. All parts carry Active product status and full compliance with RoHS3 and REACH requirements.

For Reduced Current Applications: WP934EB/2GD is suitable for applications where lower current consumption (20mA versus 25mA) and reduced brightness output (22.5mcd versus 30mcd) are acceptable design parameters. This part maintains identical voltage rating, wavelength, lens configuration, and mounting type. Selection of WP934EB/2GD should be based on explicit circuit design requirements for reduced power dissipation or lower brightness levels. This part also maintains Active product status and full regulatory compliance.

Regulatory and Compliance Considerations: All substitute parts maintain identical RoHS3 compliance and REACH unaffected status. Moisture Sensitivity Level (MSL) rating of 1 (Unlimited) is consistent across all parts, indicating no special moisture handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can WP934CA/2GD-90, WP934GO/2GD, and WP934MD/2GD be used interchangeably with WP934GE/2GD?

A: Yes. These three parts are direct substitutes with identical electrical and mechanical specifications. All maintain 25mA current rating, 30mcd brightness, 2.2V voltage rating, and 3mm T-1 through-hole right-angle mounting configuration. Selection among these parts may be based on inventory availability and supply chain considerations.

Q: What are the key differences between WP934GE/2GD and WP934EB/2GD?

A: WP934EB/2GD operates at 20mA current rating with 22.5mcd brightness output, compared to WP934GE/2GD specifications of 25mA and 30mcd. All other parameters—voltage rating (2.2V), wavelength (565nm), lens type (diffused, tinted), lens style (round with domed top), lens size (3mm T-1), and mounting type (through-hole right-angle)—are identical. WP934EB/2GD is suitable for applications requiring lower current draw and reduced brightness.

Q: Are all substitute parts manufactured by Kingbright?

A: Yes. All substitute parts listed (WP934CA/2GD-90, WP934GO/2GD, WP934MD/2GD, and WP934EB/2GD) are manufactured by Kingbright under the WP934 base product number series.

Q: Do substitute parts require different PCB footprints or mounting considerations?

A: No. All substitute parts maintain identical 3mm T-1 lens size and through-hole right-angle mounting configuration. PCB footprints and mounting procedures remain unchanged across all listed substitutes.

Q: What is the Moisture Sensitivity Level (MSL) for all parts?

A: All parts, including the main part and all substitutes, carry MSL rating of 1 (Unlimited). This indicates no special moisture handling or baking requirements during storage or assembly processes.

Q: Are all parts RoHS3 and REACH compliant?

A: Yes. All parts listed maintain ROHS3 Compliant status and REACH Unaffected classification, ensuring compliance with current environmental and regulatory requirements.

Q: What inventory levels are available for each part?

A: Current inventory levels are: WP934GE/2GD (1,701 pcs), WP934CA/2GD-90 (1,759 pcs), WP934GO/2GD (1,690 pcs), WP934MD/2GD (3,882 pcs), and WP934EB/2GD (7,296 pcs). Inventory levels are subject to change based on current demand and supply conditions.