WLNJ30-TS Equivalent & Substitute Parts

Part Overview

The WLNJ30-TS is an Omron Automation and Safety snap action switch with SPDT (double-break, double-make) circuit configuration, rated for 10A at 125V AC and 6A at 30V DC. This component features chassis mount installation with screw terminal connections and IP67 ingress protection for dust-tight, waterproof operation. The part is classified as obsolete, making identification of equivalent alternatives essential for ongoing system maintenance and component procurement.

Substiute Parts

WLNJ30-TS

Omron Automation and SafetyIn Stock: 1037WLNJ30-TS Datasheet

Current PartRFQ

WLNJ-30TS-N

Omron Automation and SafetyIn Stock: 931WLNJ-30TS-N Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The WLNJ-30TS-N qualifies as a direct substitute for the WLNJ30-TS based on the following critical parameters:

Electrical Compatibility:

• Identical SPDT circuit configuration (DB/DM)
• Matching current ratings: 10A AC, 6A DC
• Identical voltage ratings: 125V AC, 30V DC
• Same switch function: On-Momentary

Mechanical Compatibility:

• Identical mounting type: Chassis Mount
• Identical termination style: Screw Terminal
• Identical actuator type: Spring, Coil
• Identical operating force: 150gf
• Identical pretravel: 0.787" (20.0mm)

Environmental Specifications:

• Identical ingress protection: IP67
• Identical operating temperature range: -10°C to 80°C
• Identical export classification: EAR99

Distinction: The WLNJ-30TS-N represents an active product variant within the WL-N series, whereas the WLNJ30-TS is obsolete. The substitute exhibits enhanced mechanical life (15,000,000 cycles versus 10,000,000 cycles) while maintaining all functional and electrical parameters.

Parameter Comparison

Engineering Selection Recommendations

The WLNJ-30TS-N is the appropriate selection for applications currently specified with WLNJ30-TS components. The substitute part maintains full electrical and mechanical compatibility across all critical parameters while offering active product status and extended mechanical life rating. The transition from the obsolete WL series to the active WL-N series represents a direct generational update with no functional degradation. Both parts carry identical export classification (EAR99) and environmental protection ratings, ensuring compliance consistency in system designs.

Frequently Asked Questions (FAQ)

Q: Can WLNJ-30TS-N be used as a direct replacement for WLNJ30-TS in existing designs?

A: Yes. The WLNJ-30TS-N maintains identical electrical ratings (10A AC at 125V, 6A DC at 30V), circuit configuration (SPDT), mounting type (chassis mount), and environmental specifications (IP67). All functional parameters are equivalent.

Q: What is the difference between the WL and WL-N series designations?

A: The WL-N series represents the active product line continuation. The WLNJ-30TS-N offers improved mechanical life (15,000,000 cycles versus 10,000,000 cycles) while maintaining all other specifications of the original WL series part.

Q: Are there packaging differences between these parts?

A: The WLNJ30-TS is packaged with a dash designation, while the WLNJ-30TS-N is supplied in bulk packaging. Both use identical screw terminal connections and chassis mount configurations.

Q: Does the substitute part require any circuit modifications?

A: No. The WLNJ-30TS-N is a pin-for-pin and functionally equivalent replacement. No circuit modifications are necessary.

Q: What is the operating temperature range for both parts?

A: Both the WLNJ30-TS and WLNJ-30TS-N operate across the identical temperature range of -10°C to 80°C.

Q: Are both parts subject to the same export regulations?

A: Yes. Both parts carry ECCN classification EAR99, ensuring consistent export compliance.