WHB560FE Equivalent & Substitute Parts

Part Overview

The WHB560FE is a 560 Ohm ±1% 1W through-hole resistor manufactured by Ohmite in axial wirewound composition. This component is actively produced and widely used in precision analog circuits, power conditioning applications, and industrial equipment requiring stable resistance values across extended temperature ranges. Substitute parts are identified to address packaging preferences, inventory availability, and specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

WHB560FE

OhmiteIn Stock: 943WHB560FE Datasheet

Current PartRFQ

WHB560FET

OhmiteIn Stock: 3675WHB560FET Datasheet

DirectRFQ

41F560E

OhmiteIn Stock: 84541F560E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the WHB560FE is determined by matching the following core electrical parameters: 560 Ohm resistance value, ±1% tolerance, 1W power rating, wirewound composition, ±20ppm/°C temperature coefficient, and -55°C to 150°C operating temperature range. All identified substitutes maintain these specifications. Packaging format (bulk, tape & reel) and physical dimensions may vary within the axial package category. The WHB560FET introduces a non-inductive feature and alternative packaging in tape & reel format. The 41F560E belongs to the Ohmicone® 40 series with different physical dimensions but identical electrical performance.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and RoHS compliance, qualifying them for use in applications subject to environmental regulations. The WHB560FE and WHB560FET are electrically and mechanically identical with matching dimensions (0.130" Dia x 0.276" L), differing only in packaging format and the non-inductive feature of the WHB560FET. Selection between these two depends on assembly process requirements: bulk packaging for manual assembly or small-batch applications, or tape & reel for automated pick-and-place operations.

The 41F560E offers an alternative from the Ohmicone® 40 series with identical electrical specifications but larger physical dimensions (0.126" Dia x 0.437" L). This part is suitable for applications where board space is not constrained and the longer axial length is acceptable. The operating temperature range for the 41F560E is not specified in available documentation, whereas the WHB560FE and WHB560FET both specify -55°C to 150°C operation.

Frequently Asked Questions (FAQ)

Q: Can WHB560FET replace WHB560FE directly? A: Yes. Both parts share identical electrical specifications (560 Ohms ±1%, 1W, ±20ppm/°C) and physical dimensions (0.130" Dia x 0.276" L). The primary difference is packaging format (tape & reel versus bulk) and the non-inductive feature of the WHB560FET. Direct substitution is valid for any application using the WHB560FE.

Q: What is the non-inductive feature in WHB560FET? A: Non-inductive wirewound resistors are constructed to minimize parasitic inductance, making them suitable for high-frequency circuits and applications sensitive to inductive effects. The WHB560FE does not specify this feature.

Q: Can 41F560E replace WHB560FE in space-constrained designs? A: No. The 41F560E has larger physical dimensions (0.126" Dia x 0.437" L versus 0.130" Dia x 0.276" L). While electrically equivalent, the increased length may not fit existing PCB layouts designed for the WHB560FE. Verify board clearance before substitution.

Q: Are all three parts RoHS compliant? A: Yes. The WHB560FE and 41F560E are ROHS3 compliant. The WHB560FET is RoHS compliant. All three meet environmental regulatory requirements.

Q: Which part should I select for automated assembly? A: The WHB560FET in tape & reel packaging is designed for automated pick-and-place assembly. The WHB560FE and 41F560E are supplied in bulk packaging suitable for manual assembly or small-batch operations.

Q: Is operating temperature range identical across all substitutes? A: The WHB560FE and WHB560FET both specify -55°C to 150°C operation. The 41F560E does not provide an operating temperature specification in available data. Verify temperature requirements for your application before selecting the 41F560E.