W2L14C104MAT1S Equivalent & Substitute Parts

Part Overview

The W2L14C104MAT1S is a 0.1 µF ceramic capacitor manufactured by KYOCERA AVX, rated for 4V operation with X7R temperature coefficient characteristics. This component is designed for bypass and decoupling applications in surface mount configurations. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance can be maintained within the specified parameter constraints of the application circuit.

Substiute Parts

W2L14C104MAT1S

KYOCERA AVXIn Stock: 937W2L14C104MAT1S Datasheet

Current PartRFQ

W2L1ZC104MAT1S

KYOCERA AVXIn Stock: 8127W2L1ZC104MAT1S Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the W2L14C104MAT1S is permissible when the following electrical and mechanical parameters remain constant or are upgraded:

• Capacitance value: 0.1 µF (fixed requirement)
• Tolerance: ±20% (fixed requirement)
• Temperature Coefficient: X7R (fixed requirement)
• Package / Case: 0508 (1220 Metric) (fixed requirement)
• Mounting Type: Surface Mount, MLCC (fixed requirement)
• Operating Temperature Range: -55°C ~ 125°C minimum (fixed requirement)
• RoHS3 Compliance: Required (fixed requirement)
• MSL Rating: 1 (fixed requirement)

The voltage rating may be increased above the 4V specification without affecting circuit compatibility, provided the application circuit design permits higher voltage operation. The W2L1ZC104MAT1S represents an upgrade substitute with identical electrical and mechanical characteristics except for an increased voltage rating of 10V.

Parameter Comparison

Engineering Selection Recommendations

The W2L1ZC104MAT1S qualifies as a direct substitute for the W2L14C104MAT1S based on identical electrical performance at the specified capacitance, tolerance, and temperature coefficient, combined with matching mechanical package dimensions and mounting characteristics. Both components maintain ROHS3 compliance and REACH unaffected status. The substitute part carries an upgraded voltage rating of 10V compared to the original 4V specification, which provides additional design margin without introducing incompatibility. Selection between these parts depends on circuit voltage requirements and component availability. Both parts are manufactured by KYOCERA AVX and classified as active products.

Frequently Asked Questions (FAQ)

Q: Can the W2L1ZC104MAT1S replace the W2L14C104MAT1S in all applications?

A: The W2L1ZC104MAT1S is electrically and mechanically compatible with the W2L14C104MAT1S for bypass and decoupling applications. The 10V rating of the substitute part is suitable for circuits designed for 4V operation. Compatibility depends on circuit design requirements and voltage specifications.

Q: What is the difference between these two parts?

A: The primary difference is the voltage rating. The W2L14C104MAT1S is rated for 4V, while the W2L1ZC104MAT1S is rated for 10V. All other electrical parameters, physical dimensions, and compliance certifications are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts use the 0508 (1220 Metric) package with dimensions of 0.050" L x 0.080" W (1.27mm x 2.03mm) and maximum thickness of 0.022" (0.55mm). They are pin-compatible and footprint-compatible for PCB assembly.

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both the W2L14C104MAT1S and W2L1ZC104MAT1S carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage and handling.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.