W25X05CLSNIG TR Equivalent & Substitute Parts

Part Overview

The W25X05CLSNIG TR is a 512Kbit NOR Flash memory IC manufactured by Winbond Electronics, featuring SPI interface operation at 104 MHz. This Surface Mount device is housed in an 8-SOIC package and operates across a supply voltage range of 2.3V to 3.6V with an operating temperature range of -40°C to 85°C. The part maintains Active product status and holds ROHS3 compliance certification.

Substitute parts are identified based on functional equivalence in memory capacity, interface protocol, clock frequency, package form factor, and operating environmental specifications. Alternative components are selected when the primary part experiences inventory constraints or when specific packaging configurations are required for manufacturing processes.

Key Parameters

Parameter	Value
Memory Type	Non-Volatile FLASH
Memory Format	FLASH - NOR
Memory Size	512Kbit
Memory Organization	64K x 8
Memory Interface	SPI
Clock Frequency	104 MHz
Voltage - Supply	2.3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the W25X05CLSNIG TR are qualified based on the following critical parameters:

Core Functional Parameters:

Memory capacity of 512Kbit with 64K x 8 organization
SPI serial interface protocol
104 MHz clock frequency operation
8-SOIC surface mount package with 0.154" (3.90mm) width

Electrical Compatibility Parameters:

Supply voltage range must encompass or overlap with 2.3V ~ 3.6V specification
Operating temperature range of -40°C ~ 85°C

Compliance Parameters:

ROHS3 compliance certification
REACH Unaffected status

All substitute parts listed maintain these core parameters. Variations in write cycle time, voltage supply floor, and moisture sensitivity level do not disqualify substitution when the above parameters are satisfied. Packaging configuration (Tape & Reel, Cut Tape, or Tube) represents a logistical variable rather than a functional constraint.

Parameter Comparison

Parameter	W25X05CLSNIG TR (Winbond)	AT25DF512C-SSHN-T (Renesas)	AT25DN512C-SSHF-B (Renesas)	AT25DN512C-SSHF-T (Renesas)	AT25XE512C-SSHN-T (Renesas)
Memory Size	512Kbit	512Kbit	512Kbit	512Kbit	512Kbit
Memory Organization	64K x 8	64K x 8	64K x 8	64K x 8	64K x 8
Memory Interface	SPI	SPI	SPI	SPI	SPI
Clock Frequency	104 MHz	104 MHz	104 MHz	104 MHz	104 MHz
Voltage - Supply	2.3V ~ 3.6V	1.65V ~ 3.6V	2.3V ~ 3.6V	2.3V ~ 3.6V	1.65V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	8-SOIC (0.154", 3.90mm)	8-SOIC (0.154", 3.90mm)	8-SOIC (0.154", 3.90mm)	8-SOIC (0.154", 3.90mm)	8-SOIC (0.154", 3.90mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Primary Substitute - AT25DN512C-SSHF-T: This part is recommended as the primary substitute due to verified DiGi-Electronics programmability status, matching supply voltage range (2.3V ~ 3.6V), and highest available inventory (12,300 pcs). The Cut Tape & Digi-Reel packaging configuration supports both manual and automated assembly processes. ROHS3 compliance and REACH Unaffected status maintain regulatory alignment with the original part.

Secondary Substitute - AT25DN512C-SSHF-B: This variant offers identical electrical specifications to the primary substitute with verified programmability. Tube packaging configuration is suitable for manual assembly and component handling. Inventory availability (6,580 pcs) supports medium-volume requirements. Selection is appropriate when tube packaging aligns with assembly workflow requirements.

Extended Range Substitute - AT25DF512C-SSHN-T: This part extends the lower supply voltage limit to 1.65V, enabling operation in low-power applications. Verified programmability and Tape & Reel packaging support automated assembly. Inventory (4,389 pcs) is available for production requirements. Selection is appropriate when extended voltage range operation is required.

Extended Range Substitute - AT25XE512C-SSHN-T: This part provides extended lower supply voltage operation (1.65V ~ 3.6V) with Tape & Reel packaging. Programmability status is Not Verified, matching the original W25X05CLSNIG TR specification. Inventory (5,016 pcs) supports production needs. Selection is appropriate when voltage range extension is required and programmability verification is not a constraint.

All substitute parts maintain Active product status and ROHS3 compliance certification, ensuring long-term availability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the W25X05CLSNIG TR?

A: Substitution is determined by matching memory capacity (512Kbit), memory organization (64K x 8), SPI interface protocol, 104 MHz clock frequency, 8-SOIC package form factor, and operating temperature range (-40°C ~ 85°C). Supply voltage range must encompass or overlap with 2.3V ~ 3.6V. All parts must maintain ROHS3 compliance and REACH Unaffected status.

Q: Can I use a substitute part with a lower supply voltage floor (1.65V instead of 2.3V)?

A: Yes. Parts with extended lower voltage limits (AT25DF512C-SSHN-T and AT25XE512C-SSHN-T) are functionally compatible. The lower voltage floor does not prevent operation at 2.3V ~ 3.6V. Selection of extended-range parts is appropriate when system design requires low-voltage operation capability.

Q: What is the difference between the packaging options (Tape & Reel, Cut Tape, Tube)?

A: Packaging configuration affects supply and handling logistics, not electrical function. Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel packaging support automated assembly equipment. Tube packaging is suitable for manual assembly and component storage. All three packaging formats contain electrically identical components.

Q: Are all substitute parts verified for programmability?

A: Programmability verification status varies. AT25DN512C-SSHF-T, AT25DN512C-SSHF-B, and AT25DF512C-SSHN-T are verified. AT25XE512C-SSHN-T and the original W25X05CLSNIG TR are Not Verified. Programmability verification does not affect functional substitution; it indicates additional testing completion status.

Q: Can I mix substitute parts within a single production run?

A: Yes. All listed substitute parts are electrically equivalent within the specified parameters. Mixing parts from different manufacturers or base product numbers does not create functional incompatibility when core parameters match. Manufacturing process documentation should reflect the specific part number used in each assembly.

Q: What is the significance of Moisture Sensitivity Level (MSL) differences?

A: MSL rating indicates storage and handling requirements prior to soldering. The original part (MSL 3, 168 Hours) requires more controlled storage conditions than substitute parts (MSL 1, Unlimited). Substitute parts with MSL 1 rating offer more flexible storage and handling without degradation risk, providing logistical advantages.

Q: Do write cycle time differences affect substitution compatibility?

A: Write cycle time variations do not disqualify substitution. All parts meet the 104 MHz clock frequency specification. Write cycle time differences (ranging from 800µs to 12µs for word operations) represent performance characteristics rather than compatibility constraints. System design must accommodate the specific write cycle time of the selected part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message