W2330-00 Equivalent & Substitute Parts

Part Overview

The W2330-00 is a terminal turret connector manufactured by Harwin Inc., classified as a single-end panel mount terminal with threaded termination. This component features a turret head diameter of 0.136" to 0.140" (3.45mm to 4.66mm) and an above-board length of 0.587" to 0.606" (14.90mm to 15.40mm). The product is currently obsolete, necessitating identification of functionally equivalent alternatives for ongoing applications and new designs requiring compatible turret terminal solutions.

Substiute Parts

W2330-00

Harwin Inc.In Stock: 907W2330-00 Datasheet

Current PartRFQ

11511

Keystone ElectronicsIn Stock: 88111511 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the W2330-00 is determined by the following critical parameters that must align across alternatives:

Primary Substitution Criteria:

• Terminal Type: Single End configuration
• Number of Turrets: Single turret only
• Mounting Type: Panel Mount
• Termination Method: Threaded
• Contact Material: Brass construction
• Contact Finish: Tin plating
• Insulation: Insulated design with polymeric material

Secondary Compatibility Parameters:

• Length - Above Board: Functional equivalence within application-specific tolerance ranges
• Diameter - Turret Head: Mechanical fit compatibility with mating components
• RoHS Compliance: ROHS3 Compliant status for regulatory alignment

The Keystone Electronics 11511 qualifies as a substitute based on matching terminal type, turret configuration, mounting method, threaded termination, brass contact material, tin finish, and insulated construction. Dimensional variations in above-board length (13.89mm versus 14.90mm-15.40mm) and turret head diameter (1.83mm versus 3.45mm-4.66mm) represent design differences that require application-specific validation.

Parameter Comparison

Engineering Selection Recommendations

The W2330-00 is classified as obsolete, making the Keystone Electronics 11511 a functionally equivalent active alternative. Both components maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current applications.

The 11511 demonstrates active product status with current inventory availability, providing supply chain continuity for designs requiring single-end turret terminal connectors with threaded termination and brass tin-plated contacts.

Dimensional differences between the two components—specifically above-board length and turret head diameter—are inherent design variations between manufacturers. Selection between these alternatives depends on mechanical fit requirements within the specific application circuit board and mating connector geometry.

Frequently Asked Questions (FAQ)

Q: Can the Keystone Electronics 11511 directly replace the W2330-00 in existing assemblies?

A: Both components share identical terminal type, turret configuration, mounting method, and termination approach. However, the dimensional differences in above-board length (13.89mm versus 14.90mm-15.40mm) and turret head diameter (1.83mm versus 3.45mm-4.66mm) require verification against specific application mechanical constraints before implementation.

Q: What are the key differences in insulation material between these components?

A: The W2330-00 uses Polyamide (PA46) Nylon 4/6 insulation in black, while the 11511 uses Diallyl Phthalate (DAP) insulation in blue. Both materials provide electrical insulation in panel mount terminal applications. Material selection depends on application-specific environmental and thermal requirements.

Q: Are both components RoHS compliant?

A: Yes. Both the W2330-00 and 11511 are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic component manufacturing and use.

Q: Why is the W2330-00 classified as obsolete?

A: Obsolescence indicates the manufacturer has discontinued production. The Keystone Electronics 11511 provides an active alternative with equivalent functional characteristics and current manufacturing availability.

Q: What determines compatibility between these turret terminal substitutes?

A: Compatibility is established through matching terminal type (single end), turret configuration (single), mounting method (panel mount), termination type (threaded), contact material (brass), and contact finish (tin). Dimensional parameters must be evaluated against specific application requirements.