W150210-2000-TH Equivalent & Substitute Parts

Part Overview

The 3M W150210-2000-TH is a 10-position rectangular receptacle connector with 0.079" (2.00mm) pitch, designed for surface mount applications with gold-plated mating contacts. This connector is classified as Active product status and is currently in stock with 943 units available. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in board-to-board or cable connection applications.

Substiute Parts

W150210-2000-TH

3MIn Stock: 1047W150210-2000-TH Datasheet

Current PartRFQ

A3A-10DA-2SV(71)

Hirose Electric Co LtdIn Stock: 1622A3A-10DA-2SV(71) Datasheet

MFR RecommendedRFQ

M22-6340542

Harwin Inc.In Stock: 3071M22-6340542 Datasheet

MFR RecommendedRFQ

TLE-105-01-G-DV-A-K-TR

Samtec Inc.In Stock: 2534TLE-105-01-G-DV-A-K-TR Datasheet

MFR RecommendedRFQ

TLE-105-01-G-DV-A-P-TR

Samtec Inc.In Stock: 1074TLE-105-01-G-DV-A-P-TR Datasheet

MFR RecommendedRFQ

TLE-105-01-G-DV-K-TR

Samtec Inc.In Stock: 948TLE-105-01-G-DV-K-TR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the W150210-2000-TH are qualified based on the following critical parameters that must align with the original specification:

Core Matching Criteria:

• Connector Type: Receptacle
• Number of Positions: 10
• Pitch - Mating: 0.079" (2.00mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.079" (2.00mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Type: Female Socket

The identified substitute parts meet these core electrical and mechanical parameters. Variations in secondary parameters such as insulation material, contact finish thickness, operating temperature range, and compliance certifications are documented in the comparison table below to support engineering selection decisions.

Parameter Comparison

Engineering Selection Recommendations

Compliance Considerations:

The W150210-2000-TH is RoHS non-compliant. All identified substitute parts (A3A-10DA-2SV(71), M22-6340542, TLE-105-01-G-DV-A-K-TR, TLE-105-01-G-DV-A-P-TR, and TLE-105-01-G-DV-K-TR) are ROHS3 compliant, making them suitable for applications requiring RoHS compliance.

Electrical Performance:

The original part is rated for 1A at 500VDC. Substitute parts from Samtec (TLE series) provide higher current ratings of 3.2A per contact with unspecified voltage ratings. The Hirose A3A-10DA-2SV(71) maintains the 1A current rating but operates at 200VAC. The Harwin M22-6340542 provides 2A at 500VAC, offering increased current capacity while maintaining the voltage specification.

Temperature Range:

The original part operates from -55°C to 105°C. The Hirose substitute operates to 85°C, which is more restrictive. The Harwin and Samtec substitutes extend the upper temperature limit to 105°C or 125°C respectively, providing broader operational flexibility.

Connector Style Variations:

The Harwin M22-6340542 is specified as "Bottom or Top Entry," offering directional flexibility not present in the original design. The Samtec TLE series connectors are "Pass Through" type, enabling different board layout configurations.

Packaging and Production:

Samtec parts are supplied in Tape & Reel (TR) format, suitable for automated assembly. Hirose and Harwin parts are supplied in Tube packaging. Selection should align with production equipment capabilities and volume requirements.

Frequently Asked Questions (FAQ)

Q: Can the Hirose A3A-10DA-2SV(71) be used as a direct replacement for the W150210-2000-TH?

A: The Hirose part matches all core mechanical and electrical parameters including 10 positions, 0.079" pitch, surface mount solder termination, and push-pull fastening. However, the operating temperature range is limited to -55°C to 85°C compared to the original -55°C to 105°C. Verify that your application does not exceed 85°C before substitution.

Q: What is the difference between the Samtec TLE-105-01-G-DV-A-K-TR and TLE-105-01-G-DV-K-TR?

A: Both parts are identical in electrical and mechanical specifications. The primary difference is in the features: TLE-105-01-G-DV-A-K-TR includes "Board Guide" and "Pick and Place" features, while TLE-105-01-G-DV-K-TR includes only "Pick and Place." Select based on your board design requirements for guiding accuracy.

Q: Does the higher current rating of substitute parts affect compatibility?

A: Higher current ratings indicate greater contact capacity and do not negatively affect compatibility. The 3.2A per contact rating of Samtec parts and 2A rating of the Harwin part are backward compatible with the original 1A specification. Applications requiring higher current can benefit from these substitutes.

Q: Are there packaging format considerations for automated assembly?

A: Yes. The Samtec TLE series is supplied in Tape & Reel (TR) format, optimized for pick-and-place assembly equipment. The Hirose and Harwin parts are supplied in Tube packaging, which may require manual handling or different feeder systems. Confirm your assembly process compatibility before selection.

Q: What is the significance of the "Pass Through" connector type in Samtec parts?

A: Pass Through connectors allow signal routing through the connector body, enabling different board layout configurations compared to standard receptacles. This feature does not affect basic mating compatibility but may provide design flexibility for complex interconnect schemes.

Q: How do insulation material differences impact substitution?

A: The original part uses Thermoplastic insulation, while substitutes use Polyphenylene Sulfide (PPS), Polyamide (PA6T/Nylon 6T), or Liquid Crystal Polymer (LCP). These materials have different thermal, chemical, and mechanical properties. Verify compatibility with your application environment, particularly regarding temperature exposure and chemical exposure.

Q: Is RoHS compliance mandatory for my application?

A: RoHS compliance is required for products sold in the European Union and many other markets. If your application requires RoHS compliance, all identified substitutes are suitable. If RoHS compliance is not required, the original W150210-2000-TH remains a valid option.