VWRAS2-D12-D9-SIP Equivalent & Substitute Parts Reference

Part Overview

The CUI Inc. VWRAS2-D12-D9-SIP is a 2W isolated DC-DC converter module providing two outputs at +9V and -9V, each capable of supplying 111mA. It operates from a 9V to 18V input range and is intended for ITE (Commercial) applications, featuring short-circuit protection, through-hole mounting, and a compact SIP-8 package. This part is currently classified as obsolete, which necessitates identifying direct substitute models to maintain product lifecycle support, ensure ongoing manufacturability, and provide alternatives in the supply chain.

Substiute Parts

VWRAS2-D12-D9-SIP

CUI Inc.In Stock: 1265VWRAS2-D12-D9-SIP Datasheet

Current PartRFQ

RS-1209D/H2

Recom PowerIn Stock: 12506RS-1209D/H2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is permitted strictly when the following key parameters are matched:

• Type: Isolated Module
• Number of Outputs: 2
• Voltage - Input (Min): 9V
• Voltage - Input (Max): 18V
• Voltage - Output 1: 9V
• Voltage - Output 2: -9V
• Current - Output (Max): 111mA, 111mA
• Power (Watts): 2 W
• Voltage - Isolation: Equal to or greater than 1.5 kV
• Mounting Type: Through Hole
• Package / Case: 8-SIP Module, 7 Leads
• Operating Temperature: -40°C ~ 85°C
• RoHS and REACH Compliance

Only parts matching these parameters are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

The primary selection criterion is product status. The CUI Inc. VWRAS2-D12-D9-SIP part is obsolete, while the Recom Power RS-1209D/H2 is active. Both parts are RoHS and REACH compliant and meet Moisture Sensitivity Level 1 (Unlimited). These compliance and certifications fulfill standard regulatory and supply chain requirements based solely on the provided information.

Frequently Asked Questions (FAQ)

Q1: What are the essential criteria for substituting VWRAS2-D12-D9-SIP?
A1: Substitution requires matching Type, Number of Outputs, Input Voltage Range, Output Voltages, Output Currents, Power Rating, Isolation Voltage, Package, Mounting Type, Operating Temperature Range, and compliance parameters.

Q2: Is RS-1209D/H2 pin-to-pin compatible with VWRAS2-D12-D9-SIP?
A2: Both parts use the 8-SIP Module, 7 Leads package and through-hole mounting, aligning with mechanical constraints.

Q3: Are there any compliance differences between VWRAS2-D12-D9-SIP and RS-1209D/H2?
A3: Both parts are RoHS compliant, REACH unaffected, and rated MSL 1 (Unlimited).

Q4: Does the substitute part support the same operating temperature range as the original?
A4: Yes. Both parts operate from -40°C to 85°C.

Q5: Are there differences in isolation voltage capability?
A5: The VWRAS2-D12-D9-SIP provides 1.5 kV isolation, while RS-1209D/H2 provides 2 kV isolation, which meets or exceeds the original part's specification.

Q6: What should be considered regarding stock and lifecycle status?
A6: VWRAS2-D12-D9-SIP is obsolete, while RS-1209D/H2 is active, supporting ongoing production needs.