VT1060C-M3/4W Equivalent & Substitute Parts

Part Overview

The VT1060C-M3/4W is a Schottky diode array manufactured by Vishay General Semiconductor - Diodes Division. This component features a 1 Pair Common Cathode configuration rated for 60 V DC reverse voltage and 5 A average rectified current per diode. The part is packaged in TO-220-3 through-hole format and maintains Active product status. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring Schottky diode arrays with matching electrical and mechanical specifications.

Substiute Parts

VT1060C-M3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 1284VT1060C-M3/4W Datasheet

Current PartRFQ

SBCT1060

Diotec SemiconductorIn Stock: 2890SBCT1060 Datasheet

MFR RecommendedRFQ

SBCT1060

Diotec SemiconductorIn Stock: 2890SBCT1060 Datasheet

MFR RecommendedRFQ

STPS10L60D

STMicroelectronicsIn Stock: 2171STPS10L60D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the VT1060C-M3/4W are qualified based on the following criteria:

Primary Substitution Criteria (Mandatory Match):

• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Mounting Type: Through Hole
• Package / Case: TO-220 series
• Product Status: Active
• RoHS Compliance: ROHS3 Compliant

Secondary Compatibility Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Current - Average Rectified (Io): 5 A or higher
• Voltage - Forward (Vf) (Max) @ If: ≤ 700 mV
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Operating Temperature Range: Minimum -50°C to Maximum 150°C

Substitute parts meeting all primary criteria and maintaining compatibility within secondary parameters are classified as direct equivalents or functional substitutes.

Parameter Comparison

Engineering Selection Recommendations

SBCT1060 (Diotec Semiconductor): The SBCT1060 is a direct equivalent to the VT1060C-M3/4W. Both parts share identical electrical specifications: 60 V reverse voltage, 5 A average rectified current, 700 mV forward voltage at 5 A, and fast recovery Schottky technology. Both are ROHS3 compliant and maintain Active product status. The SBCT1060 features lower reverse leakage current (300 µA vs. 700 µA @ 60 V), which represents an operational advantage. The operating temperature range of the SBCT1060 (-50°C ~ 150°C) is slightly narrower at the lower bound compared to the VT1060C-M3/4W (-55°C ~ 150°C). Selection of SBCT1060 is appropriate for applications where the -50°C minimum temperature meets system requirements.

STPS10L60D (STMicroelectronics): The STPS10L60D is a functional substitute with higher current rating (10 A vs. 5 A average rectified current). This part maintains the 60 V reverse voltage specification and fast recovery Schottky technology. The STPS10L60D features improved forward voltage characteristics (600 mV @ 10 A) and lower reverse leakage current (350 µA @ 60 V). The package differs from the main part: STPS10L60D uses TO-220-2 (two leads) while VT1060C-M3/4W uses TO-220-3 (three leads). This package difference requires verification of circuit board layout and pin configuration compatibility. The STPS10L60D is ROHS3 compliant and maintains Active product status. Selection is appropriate for applications requiring higher current capacity within the same voltage class, provided pin configuration is compatible with the circuit design.

Frequently Asked Questions (FAQ)

Q1: Can SBCT1060 be used as a direct replacement for VT1060C-M3/4W?

A: Yes. The SBCT1060 meets all primary substitution criteria: identical Schottky technology, 60 V reverse voltage rating, 5 A current rating, TO-220-3 package, ROHS3 compliance, and Active product status. Electrical parameters are matched. The SBCT1060 operates within -50°C to 150°C; verify this temperature range is acceptable for your application if operation below -50°C is required.

Q2: What are the key differences between STPS10L60D and VT1060C-M3/4W?

A: The STPS10L60D has a higher current rating (10 A vs. 5 A), lower forward voltage (600 mV @ 10 A vs. 700 mV @ 5 A), and uses a TO-220-2 package instead of TO-220-3. The TO-220-2 package has two leads while TO-220-3 has three leads. This package difference requires circuit board layout verification before substitution.

Q3: Is the STPS10L60D suitable for applications designed for 5 A operation?

A: Yes. The STPS10L60D is rated for 10 A, which exceeds the 5 A requirement. Higher current rating does not prevent operation at lower currents. However, the TO-220-2 package configuration must be compatible with your circuit design.

Q4: What does the TO-220-3 vs. TO-220-2 package difference mean?

A: TO-220-3 has three leads (typically two diode leads and one common cathode lead for a diode pair). TO-220-2 has two leads (typically anode and cathode for a single diode or different configuration). Pin assignment and circuit board layout differ between these packages. Verify pin compatibility before substitution.

Q5: Are all substitute parts RoHS3 compliant?

A: Yes. VT1060C-M3/4W, SBCT1060, and STPS10L60D are all ROHS3 compliant. All parts are suitable for applications requiring RoHS compliance.

Q6: Which substitute part has the lowest reverse leakage current?

A: SBCT1060 has the lowest reverse leakage current at 300 µA @ 60 V, compared to 700 µA for VT1060C-M3/4W and 350 µA for STPS10L60D.

Q7: What is the temperature range consideration for substitution?

A: VT1060C-M3/4W operates from -55°C to 150°C. SBCT1060 operates from -50°C to 150°C. STPS10L60D specifies 150°C maximum without a minimum. If your application requires operation below -50°C, only VT1060C-M3/4W meets the specification.