VT10-2071 TNC Connector Plug Equivalent & Substitute Parts

Part Overview

The VT10-2071 is a TNC connector plug manufactured by Cinch Connectivity Solutions, designed for 50-ohm RF applications requiring crimp termination. This male pin connector operates at frequencies up to 11 GHz and supports free-hanging (in-line) mounting with threaded fastening. The part is currently active in production with 850 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, particularly impedance, connector style, contact termination compatibility, and operating frequency range. Alternative sources may be required due to supply chain considerations, manufacturing discontinuation, or specific application requirements.

Substiute Parts

VT10-2071

Cinch Connectivity SolutionsIn Stock: 867VT10-2071 Datasheet

Current PartRFQ

1-1337611-0

TE Connectivity AMP ConnectorsIn Stock: 10261-1337611-0 Datasheet

SimilarRFQ

11_TNC-50-3-117/133_NE

Huber+Suhner, Inc.In Stock: 70311_TNC-50-3-117/133_NE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the VT10-2071 are classified based on strict electrical and mechanical compatibility criteria:

Primary Substitution Criteria:

• Connector style must be TNC
• Connector type must be Plug, Male Pin
• Impedance must be 50 Ohms
• Mounting type must be Free Hanging (In-Line)
• Fastening type must be Threaded
• Maximum frequency must support 11 GHz operation
• Operating temperature range must encompass -65°C to 165°C

Contact Termination Consideration: The VT10-2071 uses crimp termination. Substitutes with alternative termination methods (such as solder) may be considered parametrically equivalent if all other electrical and mechanical parameters align, though application-specific assembly requirements must be evaluated independently.

Identified Substitutes:

1. 1-1337611-0 (TE Connectivity AMP Connectors) – Parametrically equivalent with solder contact termination; product status is obsolete
2. 11_TNC-50-3-117/133_NE (Huber+Suhner, Inc.) – Parametrically equivalent with crimp contact termination; product status is active

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 11_TNC-50-3-117/133_NE (Huber+Suhner)

This part maintains active product status and matches the VT10-2071 across all critical electrical and mechanical parameters. Both parts employ crimp contact termination, eliminating assembly process changes. The part is ROHS3 compliant and carries REACH Unaffected status, supporting regulatory compliance requirements.

Secondary Selection: 1-1337611-0 (TE Connectivity)

This part meets all parametric equivalence criteria but carries obsolete product status. While electrically and mechanically compatible, the solder contact termination differs from the VT10-2071 crimp design, requiring assembly process modification. ROHS3 compliance and REACH Affected status are documented. This option is suitable only when supply constraints necessitate alternative sourcing and assembly capability for solder termination is available.

Frequently Asked Questions (FAQ)

Q: Can the 1-1337611-0 directly replace the VT10-2071 in existing assemblies?

A: Electrical and mechanical parameters are equivalent. However, the contact termination method differs (solder vs. crimp). Direct replacement requires verification that assembly processes and equipment support solder termination. Cable group compatibility should be confirmed: VT10-2071 supports RG-174; 1-1337611-0 supports RG-174A, 188A, and 316.

Q: What is the primary advantage of the 11_TNC-50-3-117/133_NE substitute?

A: This part maintains active product status and identical crimp termination methodology, minimizing assembly process changes. It provides long-term supply continuity and regulatory compliance documentation (ROHS3, REACH Unaffected).

Q: Are there frequency or impedance limitations when substituting these parts?

A: No. All three parts operate at 11 GHz maximum frequency and maintain 50-ohm impedance. Insertion loss specifications are comparable (0.20 dB and 0.2 dB documented; 11_TNC-50-3-117/133_NE insertion loss not specified in available data).

Q: What packaging differences exist between these parts?

A: VT10-2071 and 11_TNC-50-3-117/133_NE are supplied in bulk packaging. 1-1337611-0 packaging specification is not provided in available data.

Q: Do all three parts support the same operating temperature range?

A: Yes. All three parts operate across -65°C to 165°C, supporting equivalent thermal performance requirements.

Q: What is the significance of product status (Active vs. Obsolete)?

A: Active status indicates ongoing manufacturing and supply availability. Obsolete status indicates discontinued production. The 1-1337611-0 obsolete designation may affect long-term availability and future procurement planning.