VS-KBPC810 Equivalent & Substitute Parts

Part Overview

The VS-KBPC810 is a single-phase bridge rectifier diode rated for 1 kV peak reverse voltage with 8 A average rectified current. This component is designed for Through Hole mounting in the D-72 package configuration. The part is currently Active in product status with 836 units in stock. Bridge rectifiers of this specification are essential in AC-to-DC conversion applications requiring robust voltage handling and moderate current capacity. Substitute parts become necessary when addressing supply constraints, compliance requirements, or specific packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

VS-KBPC810

Vishay General Semiconductor - Diodes DivisionIn Stock: 918VS-KBPC810 Datasheet

Current PartRFQ

VS-KBPC810PBF

Vishay General Semiconductor - Diodes DivisionIn Stock: 2677VS-KBPC810PBF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the VS-KBPC810 is determined by strict equivalence across the following critical parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 8 A
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 3 A
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-Square, D-72

The VS-KBPC810PBF meets all these criteria and qualifies as a parametric equivalent. Both parts share identical electrical ratings, thermal specifications, and mechanical form factors, enabling direct substitution in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both VS-KBPC810 and VS-KBPC810PBF are Active products from Vishay General Semiconductor - Diodes Division with identical electrical and mechanical specifications. The primary distinction lies in compliance certification: VS-KBPC810PBF carries ROHS3 Compliant status, while VS-KBPC810 is RoHS non-compliant. Both parts are REACH Unaffected and classified under ECCN EAR99.

Selection between these parts should be based on regulatory requirements applicable to the end application. Applications requiring RoHS3 compliance mandate use of VS-KBPC810PBF. Applications without such constraints may utilize either part. Inventory availability shows VS-KBPC810PBF at 2663 units versus VS-KBPC810 at 836 units, providing additional supply flexibility through the compliant variant.

Frequently Asked Questions (FAQ)

Q: Can VS-KBPC810PBF directly replace VS-KBPC810 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. Direct substitution is possible without circuit modification or re-qualification.

Q: What is the difference between VS-KBPC810 and VS-KBPC810PBF?

A: The parts are functionally equivalent. VS-KBPC810PBF carries ROHS3 Compliant certification, while VS-KBPC810 is RoHS non-compliant. All electrical ratings, thermal specifications, and package dimensions are identical.

Q: Are both parts suitable for -55°C to 150°C operating environments?

A: Yes. Both VS-KBPC810 and VS-KBPC810PBF are rated for -55°C to 150°C junction temperature operation.

Q: Do these parts require different PCB footprints?

A: No. Both parts use the D-72 package with 4-Square configuration. PCB layouts are interchangeable.

Q: Which part should be selected for new designs?

A: For new designs, VS-KBPC810PBF is recommended due to ROHS3 compliance, ensuring compatibility with current and future regulatory requirements across global markets.

Q: Is the D-72 package suitable for high-density PCB layouts?

A: The D-72 Through Hole package is a standard form factor for bridge rectifiers. Layout density depends on specific PCB design constraints and thermal management requirements of the application.