VS-10ETF02STRRPBF Equivalent & Substitute Parts

Part Overview

The VS-10ETF02STRRPBF is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This component is rated for 200 V DC reverse voltage with a 10 A average rectified current capacity and features fast recovery characteristics with a 200 ns reverse recovery time. The device is housed in a TO-263AB (D2PAK) surface mount package with two leads plus a tab configuration.

The VS-10ETF02STRRPBF has been discontinued at DiGi Electronics. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this rectifier specification.

Substiute Parts

VS-10ETF02STRRPBF

Vishay General Semiconductor - Diodes DivisionIn Stock: 906VS-10ETF02STRRPBF Datasheet

Current PartRFQ

VS-10ETF02STRR-M3

Vishay General Semiconductor - Diodes DivisionIn Stock: 788VS-10ETF02STRR-M3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VS-10ETF02STRRPBF is determined by electrical and mechanical parameter equivalence. The following criteria establish valid substitution:

Electrical Parameters (Must Match):

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.2 V @ 10 A
• Reverse Recovery Time (trr): 200 ns
• Current - Reverse Leakage @ Vr: 100 µA @ 200 V
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters (Must Match):

• Package / Case: TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -40°C to 150°C

Compliance Parameters (Must Match):

• Technology: Standard
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part VS-10ETF02STRR-M3 meets all electrical, mechanical, and compliance requirements for direct substitution. The primary distinction is packaging format: the substitute is supplied in Tape & Reel (TR) configuration versus the original part's unspecified packaging, and the substitute maintains Active product status.

Parameter Comparison

Engineering Selection Recommendations

The VS-10ETF02STRR-M3 is the direct equivalent substitute for the discontinued VS-10ETF02STRRPBF. All critical electrical parameters, mechanical specifications, and compliance certifications are identical between the two parts.

Selection Basis:

The substitute part maintains ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment with the original component. Both parts share identical electrical characteristics: 200 V reverse voltage rating, 10 A average rectified current, 1.2 V forward voltage drop at 10 A, and 200 ns reverse recovery time. The TO-263AB (D2PAK) surface mount package with identical pinout and thermal characteristics ensures mechanical and thermal compatibility in existing PCB designs.

The primary distinction is product status: VS-10ETF02STRR-M3 maintains Active status with current manufacturing availability, whereas the original part is discontinued. The substitute is supplied in Tape & Reel (TR) packaging format, which is standard for high-volume production environments and does not affect electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can VS-10ETF02STRR-M3 be used as a direct replacement for VS-10ETF02STRRPBF?

A: Yes. The VS-10ETF02STRR-M3 is electrically and mechanically equivalent to the VS-10ETF02STRRPBF. All electrical parameters, package specifications, and compliance certifications are identical. The substitute part is suitable for direct PCB substitution without design modifications.

Q: What is the difference between the original part and the substitute?

A: The primary differences are product status and packaging format. The original VS-10ETF02STRRPBF is discontinued at DiGi Electronics, while VS-10ETF02STRR-M3 maintains Active status. The substitute is supplied in Tape & Reel (TR) format, which is standard for production environments. Electrical and mechanical specifications are identical.

Q: Are the packages physically compatible?

A: Yes. Both parts use the TO-263-3 (D2PAK) package with identical lead configuration (2 leads plus tab). The TO-263AB supplier device package is the same for both parts, ensuring direct PCB compatibility without layout modifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both VS-10ETF02STRRPBF and VS-10ETF02STRR-M3 are ROHS3 compliant and REACH Unaffected. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for both parts, indicating identical handling and storage requirements.

Q: What are the key electrical parameters that define substitution?

A: Substitution is determined by matching: Voltage - DC Reverse (Vr) at 200 V maximum, Current - Average Rectified (Io) at 10 A, Voltage - Forward (Vf) at 1.2 V maximum at 10 A, Reverse Recovery Time (trr) at 200 ns, Current - Reverse Leakage at 100 µA at 200 V, and Fast Recovery speed classification. All parameters are identical between the original and substitute parts.

Q: Is the Tape & Reel packaging suitable for my application?

A: Tape & Reel (TR) packaging is standard for automated assembly and production environments. The diode itself is identical to the original part. If manual assembly or specific packaging requirements exist, consult your procurement or manufacturing department regarding packaging format availability.

Q: What is the operating temperature range for both parts?

A: Both parts operate across a junction temperature range of -40°C to 150°C, providing identical thermal performance characteristics for the specified application environment.