VS101883 CVS 06A 24-2S F4 Equivalent & Substitute Parts

Part Overview

The VS101883 is a 7-position circular connector plug with female sockets manufactured by Radiall USA, Inc. This connector features solder cup termination, threaded fastening, and is designed for industrial applications requiring high voltage and current capacity. The part is currently active in production with 701 pieces in stock. Equivalent and substitute parts are identified to provide procurement flexibility, support supply chain continuity, and accommodate specific application requirements such as material specifications, finish options, or inventory availability.

Substiute Parts

VS101883

Radiall USA, Inc.In Stock: 810VS101883 Datasheet

Current PartRFQ

97-3106A24-2S

Amphenol Industrial OperationsIn Stock: 104997-3106A24-2S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VS101883 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug, Female Sockets
• Number of Positions: 7
• Shell Size - Insert: 24-2
• Termination: Solder Cup
• Fastening Type: Threaded
• Mounting Type: Free Hanging (In-Line)
• Shell Material: Aluminum Alloy
• Contact Material: Copper Alloy
• Contact Finish - Mating: Silver
• Operating Temperature Range: -55°C ~ 125°C
• Features: Backshell, Coupling Nut
• Shielding: Unshielded

The substitute part 97-3106A24-2S manufactured by Amphenol Industrial Operations meets all mandatory matching parameters. Variations in shell finish (Green Cadmium versus Olive Drab Chromate over Cadmium), insert material (Chloroprene Rubber versus Diallyl Phthalate), and backshell plating specifications do not preclude functional equivalence when electrical and mechanical interface requirements are identical.

Parameter Comparison

Engineering Selection Recommendations

Both the VS101883 and 97-3106A24-2S are active production parts with identical electrical and mechanical interface specifications. Selection between these parts is based on the following engineering considerations:

VS101883 (Radiall USA, Inc.):

• Green Cadmium shell finish
• Chloroprene Rubber (CR) insert material
• Current rating explicitly specified at 23A
• Voltage rating explicitly specified at 900VAC, 1250VDC
• 701 pieces currently in stock

97-3106A24-2S (Amphenol Industrial Operations):

• Olive Drab Chromate over Cadmium shell finish
• Diallyl Phthalate (DAP) insert material
• Current and voltage ratings not specified in available documentation
• 1000 pieces currently in stock
• REACH Affected status noted
• Moisture Sensitivity Level: 1 (Unlimited)

Both parts are RoHS non-compliant and classified under ECCN EAR99 and HTSUS 8536.69.4020. Selection should be based on application-specific requirements for shell finish, insert material properties, and documented electrical ratings. The VS101883 provides explicit electrical specifications, while the 97-3106A24-2S offers higher inventory availability and alternative material composition.

Frequently Asked Questions (FAQ)

Q: Can the 97-3106A24-2S be used as a direct replacement for the VS101883?

A: Yes. Both connectors share identical connector type, position count, shell size, termination method, fastening type, mounting configuration, shell material, contact material, contact finish, features, shielding, and operating temperature range. These parameters define mechanical and electrical interface compatibility.

Q: What are the differences between these two parts?

A: The primary differences are shell finish (Green Cadmium versus Olive Drab Chromate over Cadmium), insert material (Chloroprene Rubber versus Diallyl Phthalate), and documented electrical specifications. The VS101883 explicitly specifies 23A current rating and 900VAC/1250VDC voltage rating, while the 97-3106A24-2S does not provide these specifications in available documentation.

Q: Are there any compliance or regulatory differences?

A: Both parts are RoHS non-compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4020) classifications. The 97-3106A24-2S is noted as REACH Affected. Applications subject to REACH regulations should confirm compliance requirements with the manufacturer.

Q: Does insert material affect connector performance?

A: Insert material affects mechanical properties such as durability, temperature stability, and environmental resistance. Chloroprene Rubber (CR) and Diallyl Phthalate (DAP) are both suitable for the specified operating temperature range of -55°C to 125°C. Material selection should align with specific application environmental conditions.

Q: What is the significance of the shell finish difference?

A: Shell finish provides corrosion resistance and environmental protection. Green Cadmium and Olive Drab Chromate over Cadmium are both established finishes for industrial circular connectors. Selection depends on application environment and any customer or specification requirements for finish type.

Q: Are both parts suitable for solder cup termination?

A: Yes. Both connectors feature solder cup termination, which allows direct soldering to printed circuit boards or cable assemblies. Termination procedures and solder specifications should follow industry standards and manufacturer guidelines.

Q: What is the Moisture Sensitivity Level (MSL) significance?

A: The VS101883 lists MSL as Not Applicable, while the 97-3106A24-2S specifies MSL 1 (Unlimited). MSL 1 indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. This difference does not affect functional compatibility.