VS101562 Equivalent & Substitute Parts

Part Overview

The VS101562 is a 4-position circular connector plug with female sockets manufactured by Radiall USA, Inc. This connector features solder cup termination, threaded fastening, and is designed for industrial applications requiring free-hanging in-line mounting. The part is currently active in production with 1067 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit interchangeability based on matching electrical and mechanical specifications.

Substiute Parts

VS101562

Radiall USA, Inc.In Stock: 1176VS101562 Datasheet

Current PartRFQ

97-3106A-14S-2S

Amphenol Industrial OperationsIn Stock: 126497-3106A-14S-2S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VS101562 is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility:

• Connector type (Plug, Female Sockets)
• Number of positions (4)
• Shell size designation (14S-2)
• Termination method (Solder Cup)
• Fastening mechanism (Threaded)
• Mounting configuration (Free Hanging In-Line)

Electrical Compatibility:

• Contact finish material (Silver)
• Contact base material (Copper Alloy)
• Operating temperature range (-55°C ~ 125°C)

Physical Characteristics:

• Shell material (Aluminum Alloy)
• Presence of backshell and coupling nut features
• Unshielded configuration

The substitute part 97-3106A-14S-2S from Amphenol Industrial Operations meets all critical mechanical and electrical parameters required for direct substitution in applications where the VS101562 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the VS101562 and 97-3106A-14S-2S are active production parts with equivalent mechanical and electrical specifications. Selection between these parts is based on the following factors:

Availability: The 97-3106A-14S-2S has 1209 units in stock compared to 1067 units for the VS101562, providing additional supply margin.

Compliance Status: Both parts are RoHS non-compliant and carry the same ECCN (EAR99) and HTSUS classification (8536.69.4020), indicating identical regulatory treatment for export and tariff purposes.

Environmental Specifications: Both parts operate across the identical temperature range of -55°C to 125°C and are suitable for industrial applications.

Shell Finish Variation: The VS101562 features green cadmium finish, while the 97-3106A-14S-2S features olive drab chromate over cadmium. This difference does not affect electrical performance or mechanical compatibility but may influence corrosion resistance characteristics in specific environmental conditions.

Insert Material Difference: The VS101562 uses chloroprene rubber (CR) insert material, while the 97-3106A-14S-2S uses diallyl phthalate (DAP). Both materials are suitable for the specified operating temperature range and do not affect connector interchangeability.

Moisture Sensitivity: The 97-3106A-14S-2S is rated MSL 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can the 97-3106A-14S-2S directly replace the VS101562 in existing designs?

A: Yes. Both connectors share identical mechanical and electrical specifications including connector type, position count, shell size (14S-2), termination method (solder cup), fastening type (threaded), and operating temperature range (-55°C to 125°C). Direct substitution is supported without design modification.

Q: What is the significance of the different shell finishes between these parts?

A: The VS101562 uses green cadmium finish while the 97-3106A-14S-2S uses olive drab chromate over cadmium. Both finishes provide corrosion protection suitable for industrial applications. The choice between them depends on specific environmental exposure requirements and aesthetic specifications in the application.

Q: Are there differences in insert material between these connectors?

A: Yes. The VS101562 uses chloroprene rubber (CR) insert material, while the 97-3106A-14S-2S uses diallyl phthalate (DAP). Both materials support the operating temperature range of -55°C to 125°C and maintain electrical and mechanical performance within specification. Material selection does not affect connector interchangeability.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the VS101562 and 97-3106A-14S-2S are RoHS non-compliant, carry ECCN classification EAR99, and share the same HTSUS code (8536.69.4020). They are treated identically for export control and tariff classification purposes.

Q: What is the current rating for these connectors?

A: The VS101562 is rated for 13A at 200VAC or 250VDC. Current rating data for the 97-3106A-14S-2S is not provided in the available specifications; however, both connectors use identical copper alloy contact material and silver mating finish, indicating equivalent current-carrying capability.

Q: Are these connectors suitable for outdoor or harsh environments?

A: Both connectors are designed for industrial applications with operating temperatures from -55°C to 125°C. The aluminum alloy shell with cadmium-based finishes provides corrosion protection. Specific environmental suitability depends on exposure to moisture, chemicals, and other environmental factors in the intended application.

Q: What is the difference in moisture sensitivity between these parts?

A: The 97-3106A-14S-2S is rated MSL 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling. Moisture sensitivity level data for the VS101562 is not applicable. This difference does not affect field performance or substitution compatibility.