N Type Connector Jack VN513 Equivalent & Substitute Parts

Part Overview

The VN513 is an N Type Connector Jack manufactured by Cinch Connectivity Solutions, designed for 50 Ohm RF coaxial applications. This female socket connector features panel mount installation with solder cup termination and operates across a frequency range up to 11 GHz. The part is currently active in production with 1108 units in stock. Alternative equivalent parts may be required due to supply chain considerations, design revisions, or specific compliance requirements in target applications.

Substiute Parts

VN513

Cinch Connectivity SolutionsIn Stock: 1209VN513 Datasheet

Current PartRFQ

1-1337417-0

TE Connectivity AMP ConnectorsIn Stock: 14601-1337417-0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 1-1337417-0 (TE Connectivity AMP Connectors) qualifies as a parametric equivalent based on the following critical matching parameters:

• Connector Style: N Type (identical)
• Connector Type: Jack, Female Socket (identical)
• Impedance: 50 Ohms (identical)
• Contact Termination: Solder Cup (identical)
• Shield Termination: Solder Tag (identical)
• Mounting Type: Panel Mount (identical)
• Mounting Feature: Bulkhead - Rear Side Nut (identical)
• Fastening Type: Threaded (identical)
• Frequency - Max: 11 GHz (identical)
• Number of Ports: 1 (identical)
• Dielectric Material: PTFE (identical)
• Body Material: Brass (identical)
• Center Contact Material: Brass (identical)
• Mating Cycles: 500 (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)

Both parts are classified as Active products and share identical electrical and mechanical specifications for RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

Both the VN513 and 1-1337417-0 are active production parts with identical electrical and mechanical specifications for 50 Ohm N Type panel mount coaxial connector applications. The substitute part 1-1337417-0 provides extended operating temperature range (-65°C ~ 165°C versus -55°C ~ 85°C) and carries RoHS Compliant and REACH Affected certifications. Selection between these parts should be based on application-specific temperature requirements and regulatory compliance mandates. Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications.

Frequently Asked Questions (FAQ)

Q: Can 1-1337417-0 be used as a direct replacement for VN513?

A: Yes. Both parts share identical connector style, type, impedance, termination method, mounting configuration, frequency rating, and mating cycle specifications. They are parametric equivalents for 50 Ohm N Type panel mount solder cup applications.

Q: What is the difference in operating temperature range?

A: The VN513 operates from -55°C to 85°C, while the 1-1337417-0 operates from -65°C to 165°C. Applications requiring extended temperature performance should specify the TE Connectivity part.

Q: Are there compliance differences between these parts?

A: The 1-1337417-0 is certified as RoHS Compliant and REACH Affected. The VN513 compliance status for these standards is not specified in the available data. Applications with regulatory compliance requirements should verify the 1-1337417-0 certification status.

Q: Do these connectors have different plating specifications?

A: Yes. The VN513 features gold-plated center contacts with nickel body finish. The 1-1337417-0 features silver-plated center contacts with silver body finish. Both configurations maintain 50 Ohm impedance and RF performance characteristics.

Q: What is included with each connector?

A: Both parts include 4 pieces per connector: 1 Connector, 1 Lockwasher, 1 Nut, and 1 Solder Tag.

Q: Are these parts suitable for the same frequency applications?

A: Yes. Both parts are rated to 11 GHz maximum frequency and are suitable for identical RF coaxial applications within this frequency range.