Equivalent & Substitute Parts for VMZ6.8NT2L Zener Diode Array

Part Overview

The VMZ6.8NT2L by Rohm Semiconductor is a Zener Diode Array, specified as 1 Pair Common Anode, with nominal Zener voltage of 6.8 V, a maximum power rating of 150 mW, and supplied in a surface-mount VMD3 (SOT-723) package. The product is currently listed as obsolete, making it necessary to identify alternative models with matching critical electrical and mechanical specifications. Substitute consideration is required for continued production and replacement needs.

Substiute Parts

VMZ6.8NT2L

Rohm SemiconductorIn Stock: 3031VMZ6.8NT2L Datasheet

Current PartRFQ

CDZVT2R6.8B

Rohm SemiconductorIn Stock: 22946CDZVT2R6.8B Datasheet

SimilarRFQ

BZB984-C6V8,115

Nexperia USA Inc.In Stock: 1002BZB984-C6V8,115 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based strictly on identical or closely matching electrical and mechanical parameters as provided:

• Zener Voltage (Nom) (Vz)
• Maximum Power Rating
• Reverse Leakage Current @ Vr
• Package / Case and Mounting Type
• Configuration (when specified)
• Compliance status (RoHS, MSL, REACH) Only components meeting these parameters are listed as substitutes, ensuring direct compatibility within the product category.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute zener diode arrays for VMZ6.8NT2L is driven by product status, compliance with ROHS3, REACH unaffected status, and consistency of ECCN classification. All listed alternatives fulfill these compliance requirements and present matching electrical functionality within the given datasheet parameters. Inventory status and mounting type are confirmed as suitable for direct replacement strictly based on provided data.

Frequently Asked Questions (FAQ)

Q1: Which electrical parameters are critical for substituting VMZ6.8NT2L?
A1: Key substitution criteria include Zener Voltage (Nom) (Vz), Maximum Power Rating, Current - Reverse Leakage @ Vr, and Configuration if specified.

Q2: How does package and mounting type affect compatibility?
A2: Substitute parts must share a surface mount package compatible with board layout. Package / Case should be matched as closely as specified in provided data.

Q3: Do substitutes require identical configuration?
A3: When configuration is defined (e.g., 1 Pair Common Anode), substitutes must retain this attribute for direct compatibility.

Q4: Are all substitutes compliant with RoHS and REACH regulations?
A4: Yes, all parts listed have ROHS3 Compliant and REACH Unaffected status.

Q5: Is alternative selection influenced by product status?
A5: Yes, the main part is obsolete. Substitutes must be active or available per provided inventory data for ongoing production or replacement.

Q6: Are there differences in power rating among substitutes?
A6: Yes. Substitutes provided may have lower or higher maximum power ratings than the original part, as specified. Selection must consider this direct parameter match.

Q7: Do different manufacturers influence compatibility?
A7: Manufacturer differences do not affect electrical compatibility when key parameters and compliance standards are matched per provided data.