VLS201610HBX-2R2M-1 Equivalent & Substitute Parts

Part Overview

The VLS201610HBX-2R2M-1 is a 2.2 µH shielded drum core wirewound inductor manufactured by TDK Corporation, designed for surface mount applications in the 0806 (2016 Metric) package. This component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this inductance value and package format.

Substiute Parts

VLS201610HBX-2R2M-1

TDK CorporationIn Stock: 205304VLS201610HBX-2R2M-1 Datasheet

Current PartRFQ

SRP2010-2R2M

Bourns Inc.In Stock: 5884SRP2010-2R2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the VLS201610HBX-2R2M-1 is determined by the following criteria:

Electrical Parameters (Primary):

• Inductance value must be 2.2 µH with ±20% tolerance
• Current rating must meet or exceed 1.45 A
• DC resistance must not exceed 170 mOhm

Mechanical Parameters (Primary):

• Package format must be 0806 (2016 Metric)
• Mounting type must be Surface Mount
• Physical dimensions must match: 0.079" L x 0.063" W (2.00mm x 1.60mm)
• Height seated maximum: 0.039" (1.00mm)

Environmental & Compliance (Secondary):

• Operating temperature range must encompass or match the specified range
• RoHS3 compliance required
• Shielding type must be Shielded

The SRP2010-2R2M by Bourns Inc. qualifies as a substitute based on matching inductance, package dimensions, surface mount configuration, and compliance certifications while providing improved current handling and reduced DC resistance.

Parameter Comparison

Engineering Selection Recommendations

Both the VLS201610HBX-2R2M-1 and SRP2010-2R2M maintain Active product status and satisfy RoHS3 compliance requirements. The SRP2010-2R2M provides enhanced electrical performance with 1.7 A current rating versus 1.45 A, reduced DC resistance of 150 mOhm versus 170 mOhm, and an extended operating temperature range to 125°C. Both components are classified as MSL 1 (Unlimited) and REACH Unaffected. Selection between these parts should be based on application-specific current requirements, thermal environment constraints, and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the SRP2010-2R2M replace the VLS201610HBX-2R2M-1 in existing designs?

A: Yes. Both inductors share identical inductance (2.2 µH), tolerance (±20%), package format (0806 / 2016 Metric), and physical dimensions. The SRP2010-2R2M provides equal or superior electrical performance with higher current rating and lower DC resistance.

Q: What are the key differences between these two inductors?

A: The primary differences are manufacturer (TDK vs. Bourns), core material (Metal vs. Iron Powder), current rating (1.45 A vs. 1.7 A), DC resistance (170 mOhm vs. 150 mOhm), and maximum operating temperature (105°C vs. 125°C).

Q: Are there packaging differences between these parts?

A: The VLS201610HBX-2R2M-1 is supplied in Cut Tape (CT) & Digi-Reel format, while the SRP2010-2R2M is supplied in Tape & Reel (TR) format. Both use the same 0806 (2016 Metric) surface mount package with identical physical dimensions.

Q: Do both parts meet the same compliance standards?

A: Yes. Both inductors are RoHS3 compliant, REACH Unaffected, classified as EAR99, and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which part should be selected for high-temperature applications?

A: The SRP2010-2R2M supports operation to 125°C, compared to 105°C for the VLS201610HBX-2R2M-1, making it suitable for applications requiring extended thermal performance.