VLMP232N1P1-GS08 Equivalent & Substitute Parts

Part Overview

The VLMP232N1P1-GS08 is a green surface mount LED from Vishay Semiconductor Opto Division, designed for indication applications. This part operates at 2.2V forward voltage with a dominant wavelength of 558nm and delivers 42mcd luminous intensity. The product is currently obsolete, making identification of compatible substitute parts essential for ongoing design support and component procurement.

Substiute Parts

VLMP232N1P1-GS08

Vishay Semiconductor Opto DivisionIn Stock: 948VLMP232N1P1-GS08 Datasheet

Current PartRFQ

VLMP23L2M2-GS08

Vishay Semiconductor Opto DivisionIn Stock: 967VLMP23L2M2-GS08 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the VLMP232N1P1-GS08 is determined by the following critical parameters:

• Identical forward voltage (Vf): 2.2V
• Identical package type: 2-SMD, J-Lead
• Identical mounting type: Surface Mount
• Identical physical dimensions: 2.20mm L x 1.40mm W, 1.40mm height
• Identical lens configuration: Rectangle with Flat Top, 1.50mm x 0.90mm
• Identical viewing angle: 120°
• Identical color: Green
• Compatible wavelength range: 555-560nm dominant wavelength
• Identical series: MiniLED
• Identical compliance standards: ROHS3, REACH Unaffected

The VLMP23L2M2-GS08 meets all substitution criteria. While the millicandela rating differs (21mcd versus 42mcd), this represents a lower luminous intensity variant within the same product family, suitable for applications where reduced brightness is acceptable or preferred.

Parameter Comparison

Engineering Selection Recommendations

The VLMP23L2M2-GS08 is the direct substitute for the obsolete VLMP232N1P1-GS08. Selection is based on the following factors:

• The substitute maintains identical electrical characteristics (2.2V forward voltage) and mechanical compatibility (2-SMD J-Lead package, identical dimensions)
• Both parts comply with ROHS3 and REACH standards
• The substitute is currently in active production status, ensuring long-term availability
• The substitute operates at a lower test current (20mA versus 30mA) and delivers reduced luminous intensity (21mcd versus 42mcd), which is acceptable for applications where full brightness of the original part is not required
• Identical MSL rating (2A, 4 Weeks) ensures equivalent handling and storage requirements

Frequently Asked Questions (FAQ)

Q: Can VLMP23L2M2-GS08 be used as a direct replacement for VLMP232N1P1-GS08?

A: Yes. Both parts share identical forward voltage (2.2V), package type (2-SMD J-Lead), physical dimensions (2.20mm x 1.40mm x 1.40mm height), and compliance certifications. The substitute is mechanically and electrically compatible for PCB assembly and circuit operation.

Q: What is the difference in brightness between these parts?

A: The original VLMP232N1P1-GS08 delivers 42mcd at 30mA test current. The substitute VLMP23L2M2-GS08 delivers 21mcd at 20mA test current. The substitute provides approximately 50% of the original luminous intensity. Applications requiring the full brightness of the original part should evaluate alternative high-brightness variants within the MiniLED series.

Q: Are there packaging differences?

A: Yes. The original part is supplied in bulk packaging. The substitute is supplied in Tape & Reel (TR) format, which is standard for automated assembly processes. Both are surface mount compatible with identical footprints.

Q: Do both parts have the same wavelength?

A: Both parts have identical peak wavelength (555nm). The dominant wavelength differs slightly: 558nm for the original and 560nm for the substitute. This 2nm difference is within the green LED spectrum and is not visually distinguishable in indication applications.

Q: Are the moisture sensitivity and storage requirements identical?

A: Yes. Both parts carry MSL rating 2A (4 Weeks), requiring identical handling, storage, and reflow procedures.