VJ1206Y682KXCMP Equivalent & Substitute Parts

Part Overview

The VJ1206Y682KXCMP is a 6800 pF ceramic capacitor manufactured by Vishay Vitramon, rated for 200V with X7R temperature coefficient in 1206 (3216 Metric) surface mount package. This component is in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

VJ1206Y682KXCMP

Vishay VitramonIn Stock: 843VJ1206Y682KXCMP Datasheet

Current PartRFQ

C1206C682K2RAC7800

KEMETIn Stock: 2368C1206C682K2RAC7800 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the VJ1206Y682KXCMP is determined by strict equivalence in the following parameters:

• Capacitance value: 6800 pF
• Tolerance: ±10%
• Voltage rating: 200V minimum
• Temperature coefficient: X7R
• Package footprint: 1206 (3216 Metric)
• Mounting technology: Surface Mount, MLCC
• Compliance: ROHS3 Compliant

The identified substitute C1206C682K2RAC7800 from KEMET meets all mandatory electrical and mechanical criteria. Physical dimensions remain compatible within the 1206 package specification, with allowable variation in thickness (0.067" maximum for Vishay versus 0.035" for KEMET) remaining within standard PCB assembly tolerances.

Parameter Comparison

Engineering Selection Recommendations

Both the VJ1206Y682KXCMP and C1206C682K2RAC7800 are active production components with ROHS3 compliance and identical electrical specifications. Selection between these parts is based on application-specific requirements:

The Vishay Vitramon part supports an extended upper operating temperature of 150°C compared to KEMET's 125°C maximum. Applications requiring operation at elevated temperatures above 125°C necessitate the VJ1206Y682KXCMP.

The KEMET C1206C682K2RAC7800 features reduced thickness (0.035" versus 0.067"), which may provide advantages in space-constrained PCB designs where component height is a limiting factor.

Both parts maintain identical footprint compatibility and can be used interchangeably in standard 1206 surface mount applications where the operating temperature range does not exceed 125°C.

Frequently Asked Questions (FAQ)

Q: Can C1206C682K2RAC7800 be used as a direct replacement for VJ1206Y682KXCMP?

A: Yes, for applications operating within -55°C to 125°C. If your circuit requires operation above 125°C, the Vishay part is required due to its 150°C upper temperature rating.

Q: Are the physical dimensions compatible?

A: Both parts use the 1206 (3216 Metric) package with identical length and width (0.126" x 0.063"). The KEMET part is thinner (0.035" versus 0.067"), which is compatible with standard PCB assembly processes and does not affect electrical performance.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both VJ1206Y682KXCMP and C1206C682K2RAC7800 are rated MSL 1 (Unlimited), requiring no special moisture handling during storage or assembly.

Q: Are there compliance differences between these parts?

A: Both parts are ROHS3 compliant. The KEMET part includes additional REACH Unaffected status documentation.

Q: What is the key parameter that determines substitution eligibility?

A: Capacitance (6800 pF), tolerance (±10%), voltage rating (200V), temperature coefficient (X7R), and package footprint (1206) must all match. Operating temperature range is the primary differentiator between these two parts.