VJ0805Y272KXCMP Equivalent & Substitute Parts

Part Overview

The VJ0805Y272KXCMP is a 2700 pF ceramic capacitor manufactured by Vishay Vitramon, rated for 200V with X7R temperature coefficient in 0805 (2012 Metric) surface mount package. This component is in active production status and widely used in general purpose applications requiring stable capacitance across temperature ranges. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

VJ0805Y272KXCMP

Vishay VitramonIn Stock: 868VJ0805Y272KXCMP Datasheet

Current PartRFQ

C0805C272K2RAC7800

KEMETIn Stock: 1133C0805C272K2RAC7800 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the VJ0805Y272KXCMP is determined by strict equivalence in the following parameters:

• Capacitance value: 2700 pF
• Tolerance: ±10%
• Voltage rating: 200V minimum
• Temperature coefficient: X7R
• Package footprint: 0805 (2012 Metric)
• Mounting technology: Surface Mount, MLCC
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The KEMET C0805C272K2RAC7800 meets all substitution criteria. Both parts share identical electrical specifications and package dimensions, enabling direct functional replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

Both the VJ0805Y272KXCMP and C0805C272K2RAC7800 are active production components with ROHS3 compliance and MSL 1 rating, confirming suitability for standard manufacturing and storage conditions without moisture sensitivity constraints.

The primary distinction between these parts is the operating temperature range and physical thickness. The Vishay Vitramon part supports operation to 150°C with a maximum thickness of 1.45mm, while the KEMET substitute operates to 125°C with a reduced thickness of 0.88mm. Selection between these parts depends on specific application temperature requirements and PCB assembly constraints. Both parts are electrically and mechanically compatible for 0805 footprint designs requiring 2700 pF at 200V with X7R stability.

Frequently Asked Questions (FAQ)

Q: Can C0805C272K2RAC7800 replace VJ0805Y272KXCMP in all applications?

A: Direct substitution is valid for applications operating within -55°C to 125°C. Applications requiring operation above 125°C must use the original VJ0805Y272KXCMP, which is rated to 150°C.

Q: Are the physical dimensions compatible for PCB assembly?

A: Both parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). The KEMET part has reduced thickness (0.88mm vs 1.45mm), which may provide advantages in space-constrained designs without affecting electrical performance.

Q: What is the significance of the X7R temperature coefficient?

A: X7R designates a ceramic capacitor with capacitance variation of ±15% across the operating temperature range. This stability is maintained in both the original and substitute parts, ensuring consistent circuit performance across temperature extremes.

Q: Do packaging differences affect circuit performance?

A: The Vishay part is supplied in Tape & Reel (TR) format while the KEMET substitute is in Cut Tape (CT) format. Both packaging types are standard for surface mount assembly. Format selection depends on production volume and assembly equipment compatibility, not electrical performance.

Q: Are both parts compliant with current regulatory standards?

A: Both parts are ROHS3 compliant and carry MSL 1 rating, confirming compliance with current environmental and moisture sensitivity standards for electronics manufacturing.