VJ0805Y153KXAMC Equivalent & Substitute Parts

Part Overview

The VJ0805Y153KXAMC is a 0.015 µF ceramic capacitor manufactured by Vishay Vitramon, rated for 50V with X7R temperature coefficient in 0805 (2012 Metric) surface mount package. This component is in active production status and widely used in general purpose applications requiring stable capacitance across temperature ranges. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set.

Substiute Parts

VJ0805Y153KXAMC

Vishay VitramonIn Stock: 1083VJ0805Y153KXAMC Datasheet

Current PartRFQ

C0805C153K5RAC7800

KEMETIn Stock: 4196C0805C153K5RAC7800 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence in the following parameters:

• Capacitance value: 0.015 µF
• Tolerance: ±10%
• Voltage rating: 50V or higher
• Temperature coefficient: X7R
• Package: 0805 (2012 Metric)
• Mounting type: Surface Mount, MLCC
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 (Unlimited)

The substitute part C0805C153K5RAC7800 meets all these criteria, establishing direct functional and mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the VJ0805Y153KXAMC and C0805C153K5RAC7800 are active production components with ROHS3 compliance and MSL 1 rating, confirming suitability for standard manufacturing and storage conditions without moisture sensitivity constraints.

The primary distinction is operating temperature range: the Vishay part extends to 150°C while the KEMET part operates to 125°C. Selection depends on application thermal requirements. For applications operating within -55°C to 125°C, both parts are functionally equivalent.

Physical thickness differs (1.45mm vs 0.88mm), which may impact PCB layout density in space-constrained designs. The thinner KEMET part offers potential advantages in compact assemblies.

Both parts carry identical electrical specifications (capacitance, tolerance, voltage, temperature coefficient) and package dimensions (length and width), ensuring direct mechanical and electrical interchangeability within the stated operating temperature limits.

Frequently Asked Questions (FAQ)

Q: Can C0805C153K5RAC7800 replace VJ0805Y153KXAMC in all applications?

A: Yes, for applications operating within -55°C to 125°C. If your design requires operation above 125°C, the Vishay part's extended 150°C rating is necessary.

Q: Are the physical dimensions identical?

A: Length and width are identical (0.079" x 0.049" / 2.00mm x 1.25mm). Thickness differs: Vishay is 1.45mm maximum, KEMET is 0.88mm maximum. Verify PCB clearance and component stacking requirements before substitution.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both are MSL 1 (Unlimited), requiring no special moisture handling or baking procedures.

Q: Are both parts RoHS compliant?

A: Yes. Both are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What determines substitution eligibility for this capacitor?

A: Capacitance (0.015 µF), tolerance (±10%), voltage rating (50V), temperature coefficient (X7R), package (0805), and compliance certifications must match. Operating temperature range and physical thickness are secondary considerations dependent on application requirements.