Vicor VI-JWD-IX Equivalent & Substitute Parts Reference

Part Overview

The Vicor VI-JWD-IX is an isolated module DC-DC converter designed for ITE (Commercial) applications, providing a single 85V output at up to 882mA from an 18V–36V input, with 75 W output power. It features OCP and SCP, has 3 kV isolation, and a through-hole half-brick mounting format. The product status is Obsolete, making it essential to find alternative models to ensure proper maintenance, replacement, or new design continuity where this exact specification is required.

Substiute Parts

VI-JWD-IX

Vicor CorporationIn Stock: 1219VI-JWD-IX Datasheet

Current PartRFQ

VI-JWD-IX-F1

Vicor CorporationIn Stock: 1148VI-JWD-IX-F1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are identified strictly using matching key electrical, mechanical, and compliance parameters. For the Vicor VI-JWD-IX, engineering substitution is allowed when the following parameters are identical:

• Input Voltage Range (18V – 36V)
• Output Voltage (85V)
• Output Current (882mA)
• Power Rating (75 W)
• Number of Outputs (1)
• Isolation Voltage (3 kV)
• Features (OCP, SCP)
• Operating Temperature Range (-40°C ~ 100°C)
• Efficiency (90%)
• Mounting Type (Through Hole)
• Package / Case (Half Brick)
• RoHS/Compliance Status

Parameter Comparison

Engineering Selection Recommendations

The Vicor VI-JWD-IX is obsolete. The substitute VI-JWD-IX-F1 is currently Active. Both DC-DC converters are RoHS non-compliant and share the same REACH status, ECCN, and HTSUS codes. Selection should be strictly guided by the matching product status and compliance requirements as provided. Both modules are classified as Not Applicable for moisture sensitivity. Dimensional differences may exist and should be verified for physical compatibility.

Frequently Asked Questions (FAQ)

Q1: What are the strict substitution criteria between VI-JWD-IX and VI-JWD-IX-F1?
A1: Both DC-DC converters must match in input voltage range, output voltage, output current, power, isolation voltage, features, temperature range, efficiency, mounting type, half-brick package, and compliance status.

Q2: What key compliance considerations are present?
A2: Both products are RoHS non-compliant, REACH Unaffected, ECCN EAR99, and have HTSUS 8504.40.9580. Compliance status must be consistent with application and regulatory requirements.

Q3: Is there any difference in mechanical dimensions?
A3: Yes, there are different size specifications. VI-JWD-IX measures 2.28" L x 2.40" W x 0.50" H, and VI-JWD-IX-F1 measures 2.28" L x 1.86" W x 0.79" H. Physical compatibility with the end system should be confirmed.

Q4: Are both modules suitable for ITE (Commercial) applications?
A4: Yes, both are specified for ITE (Commercial) use.

Q5: Is the substitute part current active?
A5: Yes, VI-JWD-IX-F1 is listed as Active, while VI-JWD-IX is Obsolete.