Vicor VI-JTM-CZ-F2 Equivalent & Substitute Parts Reference

Part Overview

The Vicor VI-JTM-CZ-F2 is an isolated DC-DC converter module designed for ITE (Commercial) applications. Explicitly detailed as delivering 1 output rated at 10V and 2.5A, with an input voltage range of 66V to 160V, and total output power of 25W. The module features overcurrent and short circuit protection, achieves 90% efficiency, and provides 3 kV isolation voltage. It is housed in a half brick through-hole package. The product status is "Obsolete," making it necessary to identify available substitute models matching the same electrical and mechanical parameters for ongoing product design or service requirements.

Substiute Parts

VI-JTM-CZ-F2

Vicor CorporationIn Stock: 688VI-JTM-CZ-F2 Datasheet

Current PartRFQ

VI-JTM-CZ-F1

Vicor CorporationIn Stock: 1042VI-JTM-CZ-F1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are selected strictly by matching the following key parameters: Manufacturer (Vicor Corporation), Series (VI-J00™ (25W)), Product Type (Isolated Module), Number of Outputs (1), Voltage Input Range (66V to 160V), Output Voltage (10V), Output Current (2.5A), Output Power (25W), Voltage Isolation (3 kV), Efficiency (90%), Application (ITE Commercial), Protection Features (OCP, SCP), Operating Temperature Range (-25°C ~ 100°C), Mounting Type (Through Hole), Mechanical Package (Half Brick), Compliance (RoHS status, REACH status), ECCN, and HTSUS. Compatibility across these criteria establishes suitability as equivalent and substitute components within this DC-DC converter module category.

Parameter Comparison

Engineering Selection Recommendations

Product status is the primary differentiator between the main part (VI-JTM-CZ-F2, Obsolete) and the substitute part (VI-JTM-CZ-F1, Active). Both parts are RoHS non-compliant, REACH unaffected, with identical ECCN and HTSUS classifications. The substitute part maintains all required electrical and mechanical parameters, making it suitable for direct substitution in applications that do not require RoHS compliance. Physical package dimensions differ in height (VI-JTM-CZ-F2: 1.04" H; VI-JTM-CZ-F1: 0.79" H), requiring verification of mechanical fit within existing design constraints.

Frequently Asked Questions (FAQ)

Q1: What are the key parameters that must match for substitution in DC-DC converter modules?
A1: Key parameters include input voltage range, output voltage and current, output power, isolation voltage, efficiency, application category, number of outputs, type, operating temperature range, mounting type, package, and compliance status.

Q2: Is the VI-JTM-CZ-F1 a compatible replacement for the VI-JTM-CZ-F2?
A2: VI-JTM-CZ-F1 matches all critical electrical and mechanical parameters besides package height, making it a compatible substitute within the same application and mounting constraints.

Q3: Are there differences in RoHS or REACH status between the main and substitute parts?
A3: Both VI-JTM-CZ-F2 and VI-JTM-CZ-F1 are RoHS non-compliant and REACH unaffected.

Q4: What should be considered regarding the mechanical package for substitution?
A4: The only mechanical difference is overall height (VI-JTM-CZ-F2: 1.04" H, VI-JTM-CZ-F1: 0.79" H). Confirm mechanical fit with application before substitution.

Q5: Does the substitute part provide the same protective features and efficiency?
A5: Both parts provide overcurrent protection (OCP), short circuit protection (SCP), and 90% efficiency.

Q6: Why is a substitute necessary for the VI-JTM-CZ-F2?
A6: The VI-JTM-CZ-F2 is obsolete, so a substitute is required for ongoing manufacturing or maintenance.