Vicor VI-J2T-CZ Equivalent & Substitute Parts Reference

Part Overview

The Vicor Corporation VI-J2T-CZ is an isolated DC DC converter module delivering 6.5V at up to 3.85A, designed for ITE commercial applications. With a 25W power rating, 3 kV isolation, and through-hole, half-brick package, it features input voltages from 21V to 56V. The product is listed as obsolete, necessitating identification of substitute or equivalent models for ongoing production, repair, or design continuity.

Substiute Parts

VI-J2T-CZ

Vicor CorporationIn Stock: 725VI-J2T-CZ Datasheet

Current PartRFQ

VI-J2T-CZ-F1

Vicor CorporationIn Stock: 1113VI-J2T-CZ-F1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is limited to modules with identical electrical and mechanical parameters, including series, input/output voltage ratings, output current, power rating, isolation voltage, mounting type, application, package/case, and compliance indicators. All criteria are matched strictly as listed; substitute modules must exhibit no deviation from these defined attributes. Substitution is required only due to product status (obsolete).

Key substitution parameters:

• Series
• Type
• Number of Outputs
• Input Voltage Range
• Output Voltage
• Output Current
• Power (Watts)
• Isolation Voltage
• Applications
• Features
• Operating Temperature
• Efficiency
• Mounting Type
• Package / Case
• Size / Dimension
• RoHS Status
• MSL
• REACH Status
• ECCN
• HTSUS

Parameter Comparison

Engineering Selection Recommendations

The Vicor VI-J2T-CZ is obsolete. The VI-J2T-CZ-F1 is an active model with identical series, electrical ratings, application, features, and compliance data. Both modules are RoHS non-compliant and REACH unaffected, with the same ECCN and HTSUS codes. The substitute module has a different mechanical size within the half-brick package type. Selection of VI-J2T-CZ-F1 is supported strictly by product status and matching compliance/certification parameters.

Frequently Asked Questions (FAQ)

Q: What determines direct substitution for the VI-J2T-CZ isolated DC DC converter?
A: Substitution is based on identical electrical specifications, series, mounting type, package/case, compliance, and application fields.

Q: Is the VI-J2T-CZ-F1 a form-fit-function equivalent to VI-J2T-CZ?
A: Both parts share all electrical parameters and the same half-brick package type; dimensions vary, and users must confirm mechanical fit.

Q: Are there differences in compliance or certifications between VI-J2T-CZ and VI-J2T-CZ-F1?
A: Both modules are RoHS non-compliant, REACH unaffected, and share ECCN and HTSUS designations.

Q: Should mechanical dimensions be confirmed before substitution?
A: Yes. Although both are half-brick format, physical enclosure or mounting constraints should be checked using provided dimensions.

Q: Do both parts support the same protected features?
A: Both offer OCP and SCP features as specified.