Equivalent & Substitute Parts Reference: VI-J0F-EX-F2

Part Overview

The Vicor Corporation VI-J0F-EX-F2 is an isolated DC-DC converter module providing a single 72V output at 1.04A, with an input range of 10V to 20V, rated for 75W output power. The product is classified as obsolete and carries a RoHS non-compliant status. Due to its end-of-life status, sourcing a form, fit, and function equivalent or substitute DC-DC converter with matching electrical and mechanical key parameters is essential for design continuity and supply chain reliability.

Substiute Parts

VI-J0F-EX-F2

Vicor CorporationIn Stock: 1047VI-J0F-EX-F2 Datasheet

Current PartRFQ

VI-J0F-EX-F1

Vicor CorporationIn Stock: 826VI-J0F-EX-F1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

All substitute part selections are strictly based on the following parameters: series, output voltage, output current, input voltage range, output power, isolation voltage, application type, protection features, efficiency, operating temperature range, mounting type, package/case, and dimensions within the same base product number. Compliance categories such as RoHS status and regulatory certifications are also matched as provided.

Key substitution parameters:

• Input voltage range: 10V to 20V
• Output voltage: 72V
• Output current: 1.04A
• Output power: 75 W
• Isolation voltage: 3 kV
• Features: OCP, SCP
• Package: Half Brick, Through Hole
• Series: VI-J00™ (75W), Base Product Number: VI-J0F
• Compliance status (RoHS, REACH, ECCN, HTSUS)

Parameter Comparison

Engineering Selection Recommendations

The main selection criteria are the product status and compliance fields. VI-J0F-EX-F2 is obsolete, while VI-J0F-EX-F1 is active. Both parts are RoHS non-compliant and REACH unaffected. The packaging, mounting type, application category, and all critical electrical parameters are equivalent or within the same series and base product number. The only difference is the device height/dimension, which is strictly listed above; no compliance or certification differences exist based on the provided information.

Frequently Asked Questions (FAQ)

Q1: Can VI-J0F-EX-F1 be used as a direct substitute for VI-J0F-EX-F2?
A1: VI-J0F-EX-F1 matches all critical electrical parameters and features with VI-J0F-EX-F2, including input/output voltage, current, power, isolation voltage, package/case, and compliance status. The primary physical difference is the module height.

Q2: Is there any difference in the compliance certifications between these parts?
A2: Both components are RoHS non-compliant and REACH unaffected. They share the same ECCN and HTSUS codes.

Q3: Does the change in height affect the mounting method?
A3: Both VI-J0F-EX-F2 and VI-J0F-EX-F1 utilize through-hole mounting and are supplied in half brick packages. Dimensional differences are specified in the size/dimension parameter.

Q4: Does the substitute part maintain the same protection features as the original?
A4: Both parts provide OCP (over-current protection) and SCP (short-circuit protection) based strictly on the supplied parameters.

Q5: Are there differences in available stock or product status?
A5: VI-J0F-EX-F2 is obsolete, while VI-J0F-EX-F1 is active. Inventory levels are stated in the initial parameters and may influence preferred selection when immediate sourcing considerations are made.