VIBLSD1-S5-S24-SIP Equivalent & Substitute Parts

Part Overview

VIBLSD1-S5-S24-SIP is an isolated DC-DC converter module manufactured by CUI Inc., designed for ITE (Commercial) applications. It provides a single 24V output at up to 42mA, features a 1kV isolation voltage, and supports a 4.75V to 5.25V input range at a maximum output power of 1W. This module has been designated as "Obsolete". As a result, it is necessary to identify alternative models with matching electrical, mechanical, and compliance parameters to ensure seamless replacement in legacy or ongoing designs.

Substiute Parts

VIBLSD1-S5-S24-SIP

CUI Inc.In Stock: 924VIBLSD1-S5-S24-SIP Datasheet

Current PartRFQ

PDM1-S5-S24-S

CUI Inc.In Stock: 829PDM1-S5-S24-S Datasheet

DirectRFQ

ITW0524SA

XP PowerIn Stock: 1068ITW0524SA Datasheet

DirectRFQ

TMR 1-0515

Traco PowerIn Stock: 818TMR 1-0515 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based strictly on electrical, mechanical, and compliance parameters explicitly provided for the VIBLSD1-S5-S24-SIP. Key parameters are:

• Single isolated output (24V, 42mA, 1W max)
• Input voltage range including 5V nominal
• Isolation rating at least 1kV
• Through Hole mounting in a 6-SIP Module, 4 Leads package
• Operating temperature equal to or wider than -40°C to 85°C
• Short circuit protection feature (SCP)
• RoHS compliance
• Dimensions approximately matching 0.77" x 0.24" x 0.39"

Only parts meeting all these criteria, as explicitly provided, are considered direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

VIBLSD1-S5-S24-SIP and PDM1-S5-S24-S are obsolete models, while ITW0524SA (XP Power) and TMR 1-0515 (Traco Power) are active. All listed parts are RoHS compliant. ITW0524SA and TMR 1-0515 feature the required certifications as indicated in their product details and match input/output, isolation, and packaging parameters as defined. These models comply with the substitute selection requirements for electrical, mechanical, and regulatory parameters explicitly provided for this product category.

Frequently Asked Questions (FAQ)

Q1: What determines if a DC-DC converter can be substituted for VIBLSD1-S5-S24-SIP?
A1: The substitute must match the electrical parameters (input range, output voltage/current, power, isolation), mechanical configuration (through-hole, 6-SIP module, 4 leads, compatible dimensions), features (short circuit protection), operable temperature range, and required compliance (RoHS, as provided).

Q2: Does the mounting package differ between the main and substitute parts?
A2: All parts utilize a 6-SIP Module, 4 Leads through-hole package, meeting compatibility requirements.

Q3: Are there active substitutes for the obsolete VIBLSD1-S5-S24-SIP?
A3: ITW0524SA (XP Power) and TMR 1-0515 (Traco Power) are active products that meet the specified criteria.

Q4: Is RoHS compliance consistent across all substitutes?
A4: All listed substitute parts are indicated as RoHS compliant.

Q5: Are all features, such as short circuit protection (SCP), maintained in substitutes?
A5: SCP is present in all substitutes as specified in the provided data. TMR 1-0515 also includes OCP.

Q6: Should size and dimension variations be considered?
A6: Substitute parts feature dimensions closely matching the original. Acceptable variations are limited to those explicitly provided.

Q7: Are certifications and approvals matched in substitute parts?
A7: Substitutes include relevant certifications as listed in their product details. All provided certifications are referenced for each part.