Equivalent & Substitute Parts for Vicor VI-2TP-EW

Part Overview

The Vicor VI-2TP-EW is an isolated module DC-DC converter from the VI-200™ (100W) series. It provides a single 13.8V output at up to 7.25A from a 66V to 160V input range, with a maximum power output of 100W and a 3 kV isolation rating. The product features overcurrent, overtemperature, overvoltage, and short-circuit protection (OCP, OTP, OVP, SCP). The product is classified as obsolete. Identifying suitable alternative models is necessary for new designs and ongoing production needs, especially due to its obsolete status.

Substiute Parts

VI-2TP-EW

Vicor CorporationIn Stock: 1083VI-2TP-EW Datasheet

Current PartRFQ

VI-2TP-EW-B1

Vicor CorporationIn Stock: 757VI-2TP-EW-B1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for isolated module DC-DC converters is strictly based on the following parameters: manufacturer, series, type, number of outputs, input voltage range, output voltage, maximum output current, maximum power, isolation voltage, application, features, operating temperature, efficiency, mounting type, package/case size, RoHS status, REACH status, MSL, ECCN, and HTSUS. Only parts fully matching all these electrical and mechanical criteria are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

The main part, Vicor VI-2TP-EW, is currently obsolete, and its substitute, Vicor VI-2TP-EW-B1, is marked as active. Both devices are RoHS non-compliant and share the same certification and compliance status, including REACH and MSL. The substitute offers identical electrical and functional specifications, with a difference only in the height dimension of the full brick package.

Frequently Asked Questions (FAQ)

Q1: What makes VI-2TP-EW-B1 a valid substitute for VI-2TP-EW?
A1: VI-2TP-EW-B1 matches all key electrical and mechanical parameters, including input/output voltage, output current, power, isolation, features, operating temperature range, efficiency, mounting type, and compliance characteristics.

Q2: Are there any dimensional differences to consider?
A2: Both parts are full brick modules with identical length and width. The substitute part VI-2TP-EW-B1 has a height of 1.07" (27.1mm), compared to 0.50" (12.7mm) for VI-2TP-EW.

Q3: Do compliance or certification statuses differ between these parts?
A3: Both parts are RoHS non-compliant, REACH unaffected, and have the same MSL, ECCN, and HTSUS classifications.

Q4: Are mounting and application requirements affected?
A4: Mounting type (through hole) and application (ITE commercial) are identical between both parts.

Q5: Is there any change in the electrical performance?
A5: All electrical performance parameters provided are the same between VI-2TP-EW and VI-2TP-EW-B1.