VGAS222026Y570DP Equivalent & Substitute Parts

Part Overview

The VGAS222026Y570DP is a 35 V, 1.1 kA Transient Voltage Suppressor (TVS) varistor manufactured by KYOCERA AVX in the TransGuard® series. This surface mount component in 2220 (5750 Metric) package is designed for transient voltage protection in electronic circuits. The part is currently Active in product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the specified tolerances, ensuring functional interchangeability in circuit protection applications.

Substiute Parts

VGAS222026Y570DP

KYOCERA AVXIn Stock: 1095VGAS222026Y570DP Datasheet

Current PartRFQ

VG222026Y570DP

KYOCERA AVXIn Stock: 1657VG222026Y570DP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VGAS222026Y570DP is determined by strict equivalence across the following critical parameters:

• Varistor voltage rating (31.5 V minimum to 38.5 V maximum)
• Surge current capacity (1.1 kA)
• Energy absorption (6.8 J)
• Package form factor (2220 / 5750 Metric)
• Surface mount configuration
• Single circuit topology
• Operating temperature range (-55°C to 125°C)
• Capacitance specification (7000 pF @ 1 kHz)

The substitute part VG222026Y570DP meets all these criteria and is therefore classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both VGAS222026Y570DP and VG222026Y570DP are Active products from KYOCERA AVX with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability and supply chain considerations. Both parts maintain full RoHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial and commercial applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can VG222026Y570DP be used as a direct replacement for VGAS222026Y570DP?

A: Yes. Both parts are manufactured by KYOCERA AVX with identical electrical parameters, including 35 V typical varistor voltage, 1.1 kA surge current, and 6.8 J energy rating. They share the same 2220 (5750 Metric) surface mount package and operating temperature range.

Q: Are there any differences in compliance or certification between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating.

Q: What determines if a part can substitute for VGAS222026Y570DP?

A: Substitution requires matching varistor voltage range (31.5 V to 38.5 V), surge current (1.1 kA), energy absorption (6.8 J), package form factor (2220 / 5750 Metric), surface mount configuration, and operating temperature range (-55°C to 125°C).

Q: Can parts with different package sizes be used as substitutes?

A: No. The 2220 (5750 Metric) package is a critical mechanical parameter. Different package sizes are not interchangeable due to PCB footprint and mounting requirements.

Q: Is there any performance difference between VGAS222026Y570DP and VG222026Y570DP?

A: No. Both parts are parametrically equivalent with identical electrical performance specifications across all measured parameters.