Equivalent & Substitute Parts Reference for VE-J3T-MY

Part Overview

The Vicor Corporation VE-J3T-MY is an isolated module DC-DC converter featuring a single 6.5V output at up to 7.69A with a 42V–60V input range. This part is classified as obsolete, which necessitates identification of alternative models to ensure continued product support in new designs or ongoing maintenance. Substitution is governed strictly by matching key electrical and mechanical parameters required for compatibility.

Substiute Parts

VE-J3T-MY

Vicor CorporationIn Stock: 1227VE-J3T-MY Datasheet

Current PartRFQ

VE-J3T-MY-F1

Vicor CorporationIn Stock: 1077VE-J3T-MY-F1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the VE-J3T-MY DC-DC converter is strictly determined by matching critical parameters: input voltage range (42V–60V), output voltage (6.5V), output current (7.69A), maximum power (50W), isolation voltage (3 kV), number of outputs, package type (Half Brick), mounting type (Through Hole), and compliance with ROHS3 and REACH standards. Only parts that fully align with these specifications are considered as substitutes in this product category.

Parameter Comparison

Engineering Selection Recommendations

Selection between VE-J3T-MY and VE-J3T-MY-F1 is determined by product status and regulatory compliance. VE-J3T-MY is obsolete, while VE-J3T-MY-F1 is active. Both parts are ROHS3 Compliant and REACH Unaffected, and share ECCN and HTSUS codes. Substitute selection should prioritize active product status and documented compliance certifications.

Frequently Asked Questions (FAQ)

Q1: What are the substitution criteria for the VE-J3T-MY DC-DC converter?
Substitution requires matching input voltage range, output voltage and current, maximum power, isolation voltage, number of outputs, package type, mounting type, operating temperature range, and compliance certifications.

Q2: Are VE-J3T-MY and VE-J3T-MY-F1 mechanically compatible?
Both employ Half Brick packages and Through Hole mounting. Differences exist in size/dimension, which must be considered for mechanical fit within the target application.

Q3: Does compliance affect substitution eligibility?
Both parts are ROHS3 Compliant and REACH Unaffected, meeting regulatory criteria required for substitution.

Q4: What product status should be prioritized in component selection?
Active product status is prioritized for ongoing support and supply continuity. VE-J3T-MY-F1 is active; VE-J3T-MY is obsolete.

Q5: What application types are supported by these substitutes?
Both VE-J3T-MY and VE-J3T-MY-F1 support ITE (Commercial) applications with equivalent electrical and isolation parameters.