VDRS07H275TLE Equivalent & Substitute Parts

Part Overview

The VDRS07H275TLE is a 430 V, 1.2 kA disc varistor manufactured by Vishay Beyschlag/Draloric/BC Components. This transient voltage suppressor is designed for single-circuit through-hole applications with a 9mm disc package. The component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series, allowing for component sourcing flexibility while preserving circuit performance specifications.

Substiute Parts

VDRS07H275TLE

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1008VDRS07H275TLE Datasheet

Current PartRFQ

VDRS07H275TSE

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 4325VDRS07H275TSE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the VDRS07H275TLE is determined by strict equivalence across the following critical parameters:

• Varistor voltage rating (387–473 V range)
• Surge current capacity (1.2 kA)
• Energy absorption (36 J)
• Operating temperature range (−40 to +85°C)
• Package form factor (Disc 9mm, through-hole)
• Number of circuits (1)
• Capacitance specification (140 pF @ 1 kHz)

The VDRS07H275TSE qualifies as a parametric equivalent because it maintains identical electrical performance and mechanical compatibility. The only difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both are from the same VDRS series and carry identical product status and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both VDRS07H275TLE and VDRS07H275TSE are active production components with identical electrical and mechanical specifications. Selection between them is determined by procurement and assembly requirements:

• VDRS07H275TLE (Tape & Reel): Suitable for high-volume automated assembly operations where reel-fed component handling is standard.
• VDRS07H275TSE (Cut Tape): Suitable for lower-volume applications, manual assembly, or when cut-tape format is preferred for inventory management.

Both parts maintain ROHS3 compliance and REACH unaffected status. No functional or performance differences exist between the two variants. Selection should be based solely on packaging format compatibility with the assembly process.

Frequently Asked Questions (FAQ)

Q: Can VDRS07H275TSE be used as a direct replacement for VDRS07H275TLE?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for circuit performance.

Q: Does the packaging format affect component performance?

A: No. Packaging format (Tape & Reel or Cut Tape) affects only the delivery and handling method, not the electrical or mechanical properties of the varistor itself.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance and REACH unaffected status. No regulatory or certification differences exist.

Q: What determines whether a part can substitute for VDRS07H275TLE?

A: Substitution requires exact equivalence in varistor voltage range (387–473 V), surge current (1.2 kA), energy rating (36 J), operating temperature (−40 to +85°C), package form (Disc 9mm through-hole), and circuit count (1). All other VDRS series parts with different electrical ratings are not substitutes.

Q: Is inventory availability a factor in substitution eligibility?

A: No. Inventory levels do not affect technical substitution eligibility. Both parts are actively produced and available. Inventory status is a procurement consideration, not an engineering one.