VCP10-61 Equivalent & Substitute Parts

Part Overview

The VCP10-61 is a BNC connector plug with male pin configuration manufactured by Cinch Connectivity Solutions. This component operates at 75 Ohms impedance and is designed for free hanging (in-line) crimp termination applications. The part is currently active in production with 958 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for component procurement, inventory management, or supply chain continuity.

Substiute Parts

VCP10-61

Cinch Connectivity SolutionsIn Stock: 977VCP10-61 Datasheet

Current PartRFQ

11_BNC-75-2-15/133_NE

Huber+Suhner, Inc.In Stock: 125311_BNC-75-2-15/133_NE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 11_BNC-75-2-15/133_NE manufactured by Huber+Suhner, Inc. is classified as a parametric equivalent based on the following matching criteria:

• Connector style and type: BNC plug with male pin configuration
• Electrical impedance: 75 Ohms
• Termination method: Crimp contact and shield termination
• Mounting configuration: Free hanging (in-line)
• Cable compatibility: RG-179, 187
• Fastening mechanism: Bayonet lock
• Frequency rating: 1 GHz maximum
• Operating temperature range: -65°C to 165°C
• Mating cycle rating: 500 cycles

These parameters define the functional interchangeability of the substitute part within the specified application envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the VCP10-61 and 11_BNC-75-2-15/133_NE are active production components with equivalent electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: VCP10-61 has 958 units in stock; 11_BNC-75-2-15/133_NE has 1189 units in stock
• Regulatory compliance: Both parts carry EAR99 ECCN classification and share identical HTSUS codes
• Dielectric material options: The Huber+Suhner part offers dual dielectric material compatibility (PFA and PTFE) compared to PTFE-only for the Cinch part
• RoHS compliance: The Huber+Suhner part is explicitly ROHS3 compliant; RoHS status for VCP10-61 is not specified in available data

Frequently Asked Questions (FAQ)

Q: What defines functional equivalence between VCP10-61 and 11_BNC-75-2-15/133_NE?

A: Both connectors share identical BNC plug configuration, 75 Ohm impedance, crimp termination, free hanging mounting, RG-179/187 cable compatibility, 1 GHz frequency rating, -65°C to 165°C operating range, and 500 mating cycle rating. These parameters establish direct functional interchangeability.

Q: Are there material differences between these parts?

A: The body finish differs: VCP10-61 uses nickel finish on brass body, while 11_BNC-75-2-15/133_NE uses white bronze finish on brass body. Both employ gold-plated brass center contacts. The Huber+Suhner part supports both PFA and PTFE dielectric materials versus PTFE-only for the Cinch part.

Q: Can these connectors be used interchangeably in existing assemblies?

A: Yes, provided the assembly design accommodates the specified cable groups (RG-179, 187), operating temperature range (-65°C to 165°C), and frequency requirements (up to 1 GHz). The bayonet lock fastening mechanism and crimp termination method are identical.

Q: What packaging considerations apply to these parts?

A: Both parts are supplied in bulk packaging. The VCP10-61 includes 3 pieces per connector (1 connector, 1 contact, 1 ferrule). Packaging details for 11_BNC-75-2-15/133_NE are not specified in available data.

Q: Are there compliance or certification differences?

A: Both parts share EAR99 ECCN and 8536.69.4010 HTSUS classifications. The Huber+Suhner part is explicitly ROHS3 compliant. Moisture sensitivity level (MSL) is 1 (unlimited) for VCP10-61 and not applicable for 11_BNC-75-2-15/133_NE.